Recent content by Woodsman07

Okay, not big deal. We got the workshop manual for the Kubota Gr 2000 and Installed the PTO based off what that book said. Everything went really well, the mower is running awesome and no fluid has leaked out of the overflow yet. So I'm hoping the air leak is solved.

I bought all the parts from the diagram including 510. When I was removing the mowing deck I noticed that my pto seal hade a slow leak as well as my drive shaft seal. So me and my dad decided to spilt the case and rebuild / upgrade the transmission. We got the upgraded Gr 2020 transmissions...

Got it fixed, whoever had this mower previously had the throttle cable in the wrong hole and adjusted the high idle and the low idle. I'm guessing they did that because they didn't realize that they put it back together wrong. Anyway, the tractor is fixed and running excellent now. I used a...

Okay, thank you for the advice. I plan on trying to fix it this Friday. I'll let y'all know what happens.

Good Morning everyone, My grandparents recently bought a used Kubota GR 2020 and are having issues with the tractor not idling correctly. I think the previous owner might have touched this screw. The engine is a Kohler 20HP CH640. I was hoping to compare pictures with someone else's motor to...

Okay, will do.

Okay, thank you for all the help and advice I will check / replace of these parts. Hopefully this will fix it!

Didn't see a leak from hose 10 in the picture. Ran the tractor without the fill plug, no leaks from the vent, but the fluid is loaded with bubbles. Does that mean It's sucking air? Thank you

Okay great thank you

Okay thank you, I put the hose back in the seat rest when I replaced the vent. I will try what you said and what the # 2 post says. Thanks again.

You might have a worn out steering cylinder. My steering was the same way and that seemed to fix it.

Same here, wouldn't let me on in the morning

I replaced the vent cap and nothing changed. Still having the same issue. Any advice of what to do next or things to check. I don't really know anything about these transmissions so any help would be great. thank you

I'm having the same exact issue, what ever was the solution to this. Thank you

Okay, thank you for the help and information.