WoodKutter's latest activity

  • W
    Kinda like asking how long until you sharpen your chainsaw. It depends. If the wood or grass is clean, you don't hit dirt, you can cut...
  • W
    WoodKutter replied to the thread WTB Top Link for L4600.
    Not impressed with the kubota top link. Not nearly as beefy as my John Deere 750 which has 1/2 the hp.
  • W
    WoodKutter replied to the thread safety switch.
    Not real familiar with your machine. You have a rear and mid pto correct? I would bet or hope you bumped one or the other. You also need...
  • W
    WoodKutter replied to the thread Leak and slippage.
    One of the first things to do is check the hydraulic oil dipstick which is behind the seat above the pto. See where the oil level is...
  • W
    When did it start do this? Any changes just before? New fuel, worked done to it? 45 seconds is to long to use the glow plugs anytime.
  • W
    WoodKutter replied to the thread L3301.
    https://commercial.firestone.com/en-us/agriculture/flotation-tires Something like this?
  • W
    WoodKutter replied to the thread G2000 Kubota.
    As far as I can tell gas was the only option.
  • W
    WoodKutter replied to the thread L3901 Front Axle Oil.
    Pick which ever you like, but I wouldn't mix. If you drain it doesn't matter. If your adding I'd go with the factory fill. Most likely...
  • W
    WoodKutter replied to the thread G2000 Kubota.
    3 cylinder, 4 stroke.
  • W
    WoodKutter replied to the thread UDT Oil screw up.
    Yup, change immediately. If the engine is cool, I would not start it to warm the oil. Drain overnight to get virtually all out. New...
  • W
    WoodKutter replied to the thread Paint Color for L3010.
    Approximately 1989 is what I've read. Always hard to match paint that time has faded also.
  • W
    WoodKutter replied to the thread top link hook??.
    Your tractor is a L4701 correct? I'm not sure I understand what or where your tractor was welded. Pictures would help someone to try and...
  • W
    WoodKutter replied to the thread LA724 loader for my L3940?.
    Loaders are not easy to find, new or used. Check online, there are many auction sights. Good luck.
  • W
    WoodKutter replied to the thread Loader barely raises.
    Sounds like you have found the problem. Does it have quick connects? If so sounds like it may need to be replaced. Possibly a collapsed...
  • W
    WoodKutter replied to the thread MX5400 vs M5660 size?.
    A close friend has a m5640, basically the same tractor pre tier IV. It is a lot of machine in the woods. It leaves ruts in fields the...