TxWolfman's latest activity
-
TxWolfman replied to the thread 4x4 Front Differential not Engaging.Haven't given up yet. I decided and go back to square 1 and start over. Nothing underneath looks loose or disconnected. But when I... -
-
TxWolfman replied to the thread 4x4 Front Differential not Engaging.Okay, thanks brother, for all your help.
-
TxWolfman replied to the thread 4x4 Front Differential not Engaging.Yes, the coupler look new, roll pin is intact, and splines are engaged. I even watch the splines on the output shaft, along with the...
-
TxWolfman replied to the thread 4x4 Front Differential not Engaging.I chocked each rear wheel, one at a time, and tried rolling the other, in both directions, with 4x4 engaged, in gear, and in neutral -...
-
TxWolfman replied to the thread 4x4 Front Differential not Engaging.I raised both rear wheels up, and they turn counter to each other. Propeller shaft does not turn while spinning the rear wheels in...
-
TxWolfman replied to the thread 4x4 Front Differential not Engaging.No, I have not confirmed that yet. I assume that I need to engage the 4x4 lever before doing that test, correct?
-
TxWolfman replied to the thread 4x4 Front Differential not Engaging.OK, I just went out and tried it again. 1st try there was some ground friction on the tire when I said I could turn each wheel...
-
TxWolfman replied to the thread 4x4 Front Differential not Engaging.OK, I took some time off to do some land clearing, wood splitting/stacking, etc. Got back to the tractor this morning and the 4x4 pull...
-
-
TxWolfman reacted to North Idaho Wolfman's post in the thread 4x4 Front Differential not Engaging with
Like.
Linkage being disconnectted or maladjustted would make the indicator not come on. The front coupling being bad would not effect the light. -
TxWolfman replied to the thread 4x4 Front Differential not Engaging.It looks like by removing bolts 090 and pins 020, I should be able to slide couplers 010 off to remove the shaft - sound right? I found...
-
TxWolfman replied to the thread 4x4 Front Differential not Engaging.Yeah I need to get my neighbor over to move the lever while I watch the linkage from underneath. If it was the linkage or even the...
-
If the 4wd lever doesn’t have any resistance, that’s where I would start. Probably just lost the cotter pin #220 and it came loose. I...
-
TxWolfman replied to the thread 4x4 Front Differential not Engaging.Exactly. Can't get my hands in there. Laid underneath and couldn't see anything disconnected. I just can't believe the pin would...
-
TxWolfman replied to the thread 4x4 Front Differential not Engaging.I also found this. The handle is very easy to push up and down, so I may have a linkage disconnect.
-
-
TxWolfman reacted to Firefight100's post in the thread 4x4 Front Differential not Engaging with Like.
a common fail is parts 10 &20. The pin fails and the splined collar slides, disconnecting the drive shaft to the front diff.
