Recent content by traumadoc2b

If you're still looking for manuals, check out kubotabooks.com

I have been dealing with the same OPC gremlins, repeatedly blown 5A fuse. Kubota dealer tried to tell me it was a bad fuel stop solenoid, but the tractor is shutting down normally, wouldn't be my first guess. I have also had issues previously where the treadle pedal sticks just enough that the...

Great job, now I've got to go find the short on my B2650. It has just cut out while running about a half dozen times in 2 weeks. Keeps blowing the 5 amp OPC/panel fuse. It shuts off fine when I turn the key off, so I doubt it's the key/fuel stop solenoid. When I try to start it when fuse is...

Has anyone purchased and installed a canopy from Iron Bull? They sell both metal and plastic versions - I am interested in the metal one. https://ibullmfg.com/product/kubota-universal-canopy/ I currently have a Tuff Top canopy, but the brackets keep breaking to a point that I can almost no...

Any chance you have pictures you can post?

Did you ever finish your set up and get it working? I too have a B2650 and would like to get the 3' Lane Shark, but their website says it's NOT for the B series tractors. I'd like to think that's some liability BS and that the B2650 will run the Lane Shark just fine.

Just installed the above switch. Only thing that seems different from the original is that the lens is green instead of frosted. Makes it difficult to tell if the switch is activated in sunlight, as the light is green too. I did include the spring loaded switch guard, which is easy to flip up...

What's the purpose of the other 2 wires (solid black and solid yellow)? I'm guessing one is maybe ground.

So, I finally got some of the parts and attempted to fix the switch. No dice. The lens cover was very difficult to get to fit into place, then I could never get it to spring back up. There appears to be thin, fragile plastic in the switch housing and a rubber gasket that must provide some...

That's assuming I want to move it. Then I also still have the metal housing on the joystick for the 3rd function switch which just has a hole in it and serves no purpose. I sort of like having the button there and I have been lucky to not have an issue with moisture. The cap only fell off...

I have a B2650 and noticed that the cap on the LED popped off or was otherwise knocked off. The dealer was of course unhelpful in finding the actual parts that I wanted. I originally was looking for a cap, then started looking for the switch based upon this thread. I took the switch out...

Has anyone had their hands on the new guard that comes on the LX series/LA535? It looks cool, as the Kubota name cut into the metal, and is hinged/folds down somehow to allow easier access to the hood and more clearance between the guard and the loader. Supposedly I'm told the frame of the LX...

I just did some work on my tractor, made and installed some rear remotes. I used the Rustoleum Gloss Protective Enamel (7784 charcoal gray). I think the color is a pretty good match to the factory ROPS/Kubota gray. Certainly cheaper and I can't imagine the Rustoleum is any less of a quality...

Thanks. These are the couplers I used. AGRICULTURAL TRACTOR CLAMP KITS WITH PIONEER LEVER ACTUATED QUICK COUPLERS AND DUST COVER HOUSING - 9500 SERIES CLAMP KITS...

Also bought a top link cylinder from Surplus Center as mentioned in another OTT thread. Cylinder retracted and stroke lengths are great - tried it out on my box blade. I did have to grind off about 1/8" from the swivel eye where it connects to the back of the tractor, it was just a little too...