Recent content by tophat

Looks like the new seat I put on sat a little higher and did not push the switch button down far enough. So I found a small black round magnet ( so it would mach the color of the seat ) and glued it to the seat. Problem solved. I want to say Thanks to every ones help with this.

Thanks for the print . I have checked the switch on the right side and the continuity says it is opening and closing as it should coarse that was with the seat up. Can not do it with seat down. I never did check the other switch my bad and I will do that. As you said if both test good I will put...

Are you speaking of the hydraulic ram that moves the bucket ? I have not looked at anything like that. I think I need clean all these parts then drive it and start all over . With that done I can see what is going on.

Yes it has a loader and a rear blade. I can't really be sure exactly where it is leaking it just leaks down on the tire'

I guess I put that reply in the wrong place. Sorry

I put 80 - 90 gear oil in it that was what a friend of mine had suggested.

the tractor is parked in my building most of time. I guess I will try a hole in the dipstick and see if it works. Worth a try can't think of anything else.

Yes it is hard to understand why Kubota has not come up with a vent for these if the vent is the problem.

I have looked at a brake down of the front axle and see no vent plug. It has been a while but I do not remember seeing a vent anywhere on the axle. Just the plug with the dip stick on it. Do you know of anything else I can look at or do I need to find a way to install a vent ?

I have a 206 B7510 and was wondering when i work the tractor hard the front axle leak by the tires. I do not know if it the seals or some other problem ? Dennis

while hooking up my rear blade every time I turned a little in the seat the engine would try to die. That is what it suppose to do I know. Now the safety switch does not work. I tested the continuity of the switch and pressed the button and I had continuity then released the button and did not...

Hi and thanks for the input. I finally got the filter mess straightened out. I guess where I got confused was the Kabota dealer only gave me one filter when I told him what I was doing. Then when I went to change the oil I saw it had 2. So I called the Kabota dealer and another guy said oh yea...

I will do that. I have been searching for some ting like that but just haven't been able to find it or just didn't know how to find it. Thanks for all the help. Dennis

Thanks for the info. So both of those filters are for the tranny. I was wondering if that was the case. The owners manual is not real clear on it. I wonder why the Kabota dealer never gave me the other filter. Maybe he did not understand the parts list when he looked up the filter. By any chance...

Hello My name is Dennis and this is my first time on this forum. I live in the NW corner of Nebraska. I just bought this B7510 with 62 hours on it and I'm trying to do the 100 hour maint. on it. I was told by the original owner that the 50 hour was not done. It now has 82 hours on it and I would...