Recent content by Tmar04

Just received Kubota frontvweight bracket but won’t work with grill guard in place. Do I have to choose which one I want, or cut , grind and fabricate until both work ? My tractor is a 2320, B series. Suggestions before I start messing things up. Thanks

I’m a little puzzled about height of mower deck. I don’t like to scalp lawn. I have my deck set at 3”. To get the three inch height, is that when you raise the suspended deck all the way up, or all the way down. I just don’t understand how it works ***128514;***128514; thanks to all

Getting ready to buy a quality boxblade for my b7300. Will it handle a bush hog sbx480? Weighs 430 lb

Could someone steer me to an article about removal of my RCK 54-24b belly mower from my b7300. Mine is not the drive on model. Thanks to all who offer advice. Getting on in years and need to do things the easy way!

I'm looking for an original Kubota, Yanmar, or similar, cat 1 toplink for my B7300. I realize the Chinese made top links are available everywhere, but I used to have a yanmar that worked great for me. Over the years, it got away from me. Any help, let me know price and length. Thanks to all.

Getting ready to service tranny . How many drain plugs and where are locations ? I hVe belly mower on mine and hard for me to find drain plugs, also , where is filter screen? Ok to use different (wix, etc) spin on filter ? Thanks to all you giys

I have 05 rtv 900 with hyd dump bed and want to add extra set of remotes to utilize wood splitter and other hyd attachments. Has anyone done this? Don't know where to begin. Comments appreciated .

I have a 1980s B6100 gear drive 4x4 that runs, but needs overhaul. Low compression and hard to start. Smokes on startup . All hydraulics work, has new battery and new steering box. ( those two items alone cost me 500.00) If you are interested at 850.00, send me email and I will send you pics...

Figured it out. Had connection at fuel pump wrong. Changed it and now works fine!

Installed hand throttle Kubota rtv 900 I installed a factory issue hand throttle kit. All went well til I tried to use it . Pressure on accelerator very very hard to depress now. Much different. Hand throttle has to be free to slide back and forth inside cable sheath as you operate accelerator...

Just installed new Kubota hand throttle. First thing I noticed is increased effort to depress accelerator! Is it because accelerator pedal has to operate the extra cable. Etc of the hand throttle? I'm sure it is on correctly. No problems just have to really press hard to get up to speed . Let me...

Sold tractor/loader for 6200.00.,

Thanks, my Canadian friend. I found it.

Could one of you rtv mechanics tell me where the speedo sender is located, and describe what it looks like on my 2005 rtv 900 worksite model. Speedo does not work and I am chasing down possible connection problems some pics would be great! Thanks to all

I know exactly what you mean! I live in South Georgia and subscribe to a state buy and sell paper and every time I find something of interest, it is on the Tennessee or North Carolina border! Oh well, sometimes you gotta drive to get the bargains. Gas only 2.00 a gal here!!