Recent content by TimU

The part number I was given for the valve in the kit is 75536-62011. I’m trying to figure out if it’s a compatible replacement for mine that will operate my loader.

It’s a reasonably priced complete B2056 kit for tractors without a loader to run a snowplow or other hydraulic attachment. The only difference is the mounting plate for the control valve and the arm that bolts to the tractor are one piece. I’ll need to cut the mounting plate off, drill holes...

I have an opportunity to purchase a complete new control valve kit locally that is mostly compatible, I will just need to modify the mounting plate for my older 2-piece model. I wasn’t wanting to spend that much but based on your info and talking with the Summit Customer Care rep it sounds like...

Thanks 😄 I have a 3 position valve, there’s no float position.

Pardon my ignorance, but I’m not that familiar with hydraulics. How do I tell if it’s spool 3 or 4 position? Thanks

The While it has served me well, my 2003 B7500 originally came from an equipment rental place and is thoroughly used. The hole for the lever control is wallered out and the bushing is gone. Unless there’s a good way to rebuild it, I’m stuck replacing it. The rest of the linkage is pretty worn...

I have, but I really need a new “stay valve” (75536-66110) as well that the valve itself bolts to and where the lever control (handle) attaches. Kubota wants about $400 or more just for the stay.

My OEM valve leaks profusely and the linkage is worn out. I found the Summit valve recommended in OTT forums and was considering it for the cost savings. OEM is considerably more expensive.

Has anyone replaced their Kubota LA272 or similar model loader control with an aftermarket one? If so, which brand/model did you use and were additional fittings required? Please provide a photo if possible. I’m looking at a P40G-2A1-J from Summit Hydraulics and I believe I will also need their...