TheOldHokie's latest activity
-
TheOldHokie replied to the thread B7800 front axle ball bearing question.I know all about the counterfeit bearing problems. And for that very reason Kubota is not going to buy their radial ball bearings from a... -
TheOldHokie replied to the thread B7800 front axle ball bearing question.I designed and manufacture a hydraulic pump for old Ford tractors. I buy Koyo bearings "in bulk" frim MRO Supply. The bearings are drop...
-
TheOldHokie replied to the thread B7800 front axle ball bearing question.Then it needs to be recalibrated if you want to measure absolute values to tenths. At a minimum you need to check it against a 1" gage...
-
TheOldHokie replied to the thread 1640a loader float?.My B1630 was like that from the day I bought it. I always thought it was normal. Dan
-
TheOldHokie replied to the thread B7800 front axle ball bearing question."After a stop at the local Kubota dealer for a new bearing," I expect Kubota buys bearings direct from NSK. What surprises me is its...
-
TheOldHokie replied to the thread Front end loader control valve leaking.To me that does not look bad enough to worry sbout. The seals are at the point where the spools exit the body. Dan
-
TheOldHokie replied to the thread Question on a Kubota B2400 Loader Valve.Thats not "normal". Float is typically A,B->T P->PB. Thats certainly true on a LA525. Can you operate the bucket when the boom spool...
-
TheOldHokie replied to the thread B7200 FEL to mini skidsteer quick attach modification.I know it well right down to the split bucket. :devilish: Do you have all the other brackets? Dan
-
TheOldHokie replied to the thread M5040 3 point hitch.History is not really relevant. The only way the 3pt lever can work in reverse is if the internal linkage is moving in reverse. Position...
-
TheOldHokie replied to the thread B7800 front axle ball bearing question.What were the neasuremenths to tenths. of both shafts. Is your mic reliably calibrated? Assuming both bearings are normal precision the...
-
TheOldHokie replied to the thread M5040 3 point hitch.Which lever are you using to raise and lowet the 3pt? Dan
-
-
It's not a hydraulic line connection, it's near to impossible to change the flow of that system. Your not adjusting the draft control...
-
TheOldHokie replied to the thread M5040 3 point hitch.You swapped the loader tank and power connections cutting off all flow to the 3pt. The problem is not the hydrsulic plumbing. Please...
-
TheOldHokie replied to the thread Hydraulics help : no pressure high rpm - normal at idle.He has a Kubota LA364 and Kubota loader valves have serial lift sections. When the boom is raised or lowered without operating the...
-
TheOldHokie replied to the thread M5040 3 point hitch.The power beyond hose IS the neutral hose. I think you need sone guidance. Dan
