TheOldHokie's latest activity
-
I purchased my Kubota L3010 HST second hand last year. Came with a well used 5' brush hog and an RC-72A belly mower whose wear appeared... -
TheOldHokie replied to the thread B7200D gear lever leaking hydro fluid.I have never removed it but if its a slip fit and not screwed on its probably glued itself to the lever. Wrap something around the knob...
-
TheOldHokie replied to the thread Lift arms on 2350DT stuttering with auger attachment.That is how position control works. When you move the PCL up to an intermediate position the lift arms raise to match that position and...
-
TheOldHokie replied to the thread L2195A Gear Oil change.Barring something extraordinary like water intrusion never ever. Dan
-
TheOldHokie replied to the thread L2195A Gear Oil change.Thats what I suspected. Like many implements it does not need to be routinely changed - just kept full. Dan
-
TheOldHokie replied to the thread BH77 Hydraulic Cylinder Mess.I wpuld say keep it fully down (float) when the hoe is mounted. If this is seals not loose hose fittings its not gping to fix itself. Dan
-
TheOldHokie replied to the thread L2195A Gear Oil change.What does the owners manual say about changing the oil? Dan
-
TheOldHokie replied to the thread BH77 Hydraulic Cylinder Mess."That said just not sure why it all started right after the maintenance" Ever hear of coincidence? *Thats correct the swivels at the...
-
TheOldHokie replied to the thread BH77 Hydraulic Cylinder Mess.I think your picture is showing the control valve and the circles are around the swivels on the end of the hoses. Is that correct? A...
-
TheOldHokie replied to the thread Lose bolts The bolts.Thats a new one on me. Dan
-
TheOldHokie replied to the thread Lose bolts The bolts.All of the Loctite products can be removed if needed. Dan
-
If the bolts are loosening then the Loctite isn't working. Some Loctite products will work even if the parts are oily. You could also...
-
TheOldHokie replied to the thread Lose bolts The bolts.Black thread what? Loctite thread locker is red, blue, or green. In any event I still suggest wait and see. Dan
-
TheOldHokie replied to the thread Summit 3rd function O-ring leak.NPT would have been my first guess but no orings on them either. Dan
-
TheOldHokie replied to the thread Summit 3rd function O-ring leak.If the adapters have orings on both ends they are ORB to ORB. JIC fittings do mot have orings. Dan
