The Evil Twin's latest activity
-
The Evil Twin reacted to skeets's post in the thread Land Pride SGC0554 Claw Grapple Grinding Noise?? with
Haha.
You aint never seen me brake a drill bit in .003 seconds have ya ;) -
The Evil Twin reacted to top gnome's post in the thread Land Pride SGC0554 Claw Grapple Grinding Noise?? with Like.
I know you probably know this but are you holding the button down after the grapple closes. deadheading the hydraulics. that makes a...
-
The Evil Twin replied to the thread Brake problems.OK, I think u understand what you are saying now. The pedal is useless when rolling backwards? That does seem really strange.
-
The Evil Twin replied to the thread Brake problems.Calling it "unsafe" is a stretch. Operating a tractor is unsafe. You shouldn't park on a hill unless the machine is perpendicular...
-
The Evil Twin replied to the thread "Burnishing" your new brakes. WTF......... Now I've heard it all. (I'm raising the Bullsh!t flag).FWIW, the bedding process for brakes (burnishing) is to facilitate the transfer of friction material from the pad to the steel of the...
-
The Evil Twin reacted to whatsupdoc's post in the thread "Burnishing" your new brakes. WTF......... Now I've heard it all. (I'm raising the Bullsh!t flag) with Like.
All new brakes require some "wear in" before the wear material achieves full contact whether disk or drum. It is best not to be very...
-
I have become a huge fan of the dump trailer. Using it all the time, so much so my wife hasn't had it long enough to finish the last...
-
He's lucky you didn't lose your balance and fall - taking out a display or twoo_O
-
The Evil Twin reacted to mikester's post in the thread Max safe depth for water crossing? with Haha.
AI says "The maximum safe depth for a water crossing in a vehicle depends on the vehicle's wading depth, which is the maximum depth of...
-
The Evil Twin replied to the thread Greasing Front Axle Support.You can use a 8 point socket. Technically not the right tool for the job, but it requires very little torque to R&R that little plug...
-
What grizbota and evil twin said. Front has the plug you remove and pump until grease oozes from the plug. The back one has no vent...
-
The Evil Twin reacted to Yooper's post in the thread A little gunsmithing on a hot afternoon with Like.
Going down one of my rabbit holes just to satisfy my curiosity. Just for the heck of it, I put my Rem 700 action with the scope rings...
-
The Evil Twin replied to the thread Wheels for land rake...yes or no?.The needle rake is probably what you want UNLESS you want a dual purpose tool. I use a York Rake to spread gravel, top soil, wood chips...
-
The heat was pretty intense in South Dakota's Bad Lands a few days ago. I aint used to 106 degree weather. It was so hot, Prairie Dog...
-
Can't run around the property naked in the winter either... :ROFLMAO: