Recent content by stvdilln

Thank you so much for all the great help and time and hopefully a thread that others will find in the future. Will build out this test rig and will follow up in several days with the results.

I’ll have to track down an appropriate gauge, and will test just before the cylinder.

Thanks since it wasn’t working very well before the filter, it has now returned to its initial state before the filter change. Which is a very low lift capacity on 3pt hitch.

Sorry for the delay, I’m in south Florida and had to deal with our 2nd possible hurricane this fall. Opening the hydraulics at the connector just before the splitter yielded a gusher of a flow. After that test, hydraulics improved back to original poor performance. The hydraulic shift now...

The warning light now occasionally flickers with revs, but is on at idle. I didn't change the fluid as it looked ok to my untrained eye. Is next step just to change the fluid as well and hope to flush out blockage, or is there a procedure/manual on cleaning hydraulic pump. I am an intermediate...

I topped off with what I had in shop, but it is just a bit low still like a 1/8 of inch from full mark, we ran to tractor supply last night and bought more, will be adding that this morning.

The tractor was bought at an auction a couple of months ago. It looks like somebody was working on a restoration, new paint and decals. It has about 6000 hours. No history avail. We bought it to pull a row bed maker that is too big for our other tractor. Last week we tested and the hydraulics...