Recent content by ssullivan

Dave, It does have an OPC, part number 6C190-55515 Steve

Dave, I purchased a new switch which performed exactly as you described for 4-5 starts. After a no start I pulled the solenoid and it was not ‘pulling’ in on the START position but was holding in the ON position. What is your suggestion on the next step? Steve

Is the OPC, 060 in the diagram? The solenoid has two wires. I have a test light. I can start the machine when I remove the solenoid from the equation. Turn off with manual shutoff. The reason I mention the switch is that before I installed the solenoid and after I put the new switch on I...

B7800 would not start. Good fuel flow to injection pump. No fuel at injectors. Heard fuel shut off solenoid click when key turned to run position. After removing solenoid I figured out that the key switch would reactivate the solenoid to the off position when key turned to the start position...

B7800 is hard to steer with high RPMs. Decrease RPMs steering is fine. Approx. 50 hrs on oil and filter(s) change. All other functions are normal. Any suggestions? (Steering priority valve?)