Springer's latest activity
-
Springer reacted to TheOldHokie's post in the thread BX-2680 Hydraulics loosing lift power with
Like.
Here i a a gauge -:there are plenty of other sources. Get a quick coupler to match the ones on the loader and use it to plug the gauge... -
Springer replied to the thread BX-2680 Hydraulics loosing lift power.Can you point me in the right direction. Where to purchase a guage and where to tap in?
-
BX-2680 2021 70 hours My Kubota hydraulics is getting wimpy. I can barely lift the front wheels off the ground when I curl. I used to...
-
RTM https://www.youtube.com/shorts/oktQAndwOig
-
Springer replied to the thread BX2380 mower lift adjustment issues.Have same and always had troubles with raising and lowering the mower deck. In fact, if I knew then when I bought the tractor (new), I...
-
One way to look at this is, a motorcycle, generator etc are devices that typically run at a high RPM right off the bat. A generator...
-
Springer replied to the thread Fuel blockage in tank.The BX has a straight shot 4 inch hole. I do strain thru a filtered funnel though.
-
I cleaned my JD tank out with a shop vac. It smelled like diesel for months. You can probably prevent that by rigging up a remote vacuum...
-
I watched that video and it seems to be easy and a Real solution if it ever happens again.
-
Springer replied to the thread Fuel blockage in tank.I am up and running again. What I had was a gel formed by diesel fuel and whatever - probably moisture and biologics. It formed about...
-
Have you been using algaecide? With the fuel usage that low my bet is you're growing colonies of "crobies" in the tank. I'm betting...
-
You could get one of those USB inspection / endoscopic cameras and look into the tank: https://www.ebay.com/itm/176997063043 You...
-
I have a little bx-2680. 70 hrs old Last year it would run and then start surging and sometimes shut off. I changed the filters and...