Spikes's latest activity
-
Spikes replied to the thread 3 point trouble.Thank you for the illustrations and information. The tractor is driving just fine. I have to jump the solenoid at the moment, since the... -
You didn't answer how it's moving? I'll assume that it's moving fine. First you have PS so power is going through the pump to the second...
-
Spikes replied to the thread 3 point trouble.I learn more about my tractor from every post, yours included. Thank you for helping!
-
I had a brain fart and used the wrong term- is an unloader valve. It will most likely be inside the case, near the 3 point control.
-
Spikes replied to the thread 3 point trouble.I’ll try to locate the uplift valve and check it. Looking at YouTube videos, if there’s pressure, there’s really only a few components...
-
Spikes replied to the thread 3 point trouble.I’ll check that. Thank you.
-
At the factory parts website you'll see the L3450 had a lot of optional hydraulic setups. If the machine has a loader its supply and...
-
Sitting that long, the unloader valve could be corroded and stuck. If it is, it allows the hydraulic oil to bypass.
-
Spikes replied to the thread 3 point trouble.There is no loader or any other accessory on the tractor. I’ll try to find the pump and see if I can figure anything out with it. The...
-
Does it have a loader? How is the steering and movement? I have the same model in a GST. They are a little picky about suction to the...
-
It might be the pump is not pumping for some reason. Do you have any other hydraulically driven equipment? If so do they work? I...
-
Hi gang, My old L3450 has been sitting for a couple of years. The engine had seized after it was left in the weather (open exhaust)...
