Recent content by slowgo

I have one I removed mine and has the 2 still looking

I have a B7100 as well and it was allways hard to start, I put a hot wire from the battery right to a toggle switch from there to the glow plugs, by passed everything else, did help, going thru the switch I only had 8 volts or so going to my glow pugs, now I have the full 12 volts

I was given a G4200 with a 2 cylinder in it, took me awhile but got it running, but the mower deck gear box is froze, going to tare it apart see whats going on, any ideas before taking that apart ?

I picked up a 1978 B7100 could not find a FEL so built one picks up soon

thanks for the info will post pics when completed

I am building a loader for my B7100 and can not find the bushings I need for the pivot points. I am going to use black pipe and stainless steel pins, that would be removable and easily replaceable, for the black pipe bushing might wear out fast, thoughts-concerns- any try this before? any input...

I take it I got very lucky I bought the front pto shaft with the double chain for 50 bucks today, older B7100

I have built the sub frame and now building the loader, really need a shaft or coupler that will fit the front shaft for a pto pump, I have a early model 80s any help on finding one would be very helpful, thanks

I have a B7100 that I want to build a loader for and need a part number 70050-00105 Sub - Frame Weld, used or new, any info on where I could get one would be greatly appreciated, thank oy

was hooked up to tractor hydraulics and the loader does come with the block and lines thats was hooked up to the tractor it was removed from

I have for sale or trade a kubota 1200 loader, I purchased this for my Kubota and it is to big for my tractor. It currently has all 4 hydraulic cylinders and a 2 position valve attatched to it. Also have the frame that bolts to a Kubota tractor but not sure which model. pics upon request...

my B7100 has 10mmx1.25mm and I have bought them here local at the hardware store, I had to remove the original bolts to get longer ones

I have a kubota 1200 loader with the mounting to tractor frame, if still looking

Does any one have a loader frame for a B7100 that can get me some close up pictures of it and where it bolts to the tractor please, can not find one and going to build one, thank you

mine is like around 9inches if need exact measurement i could get later