Recent content by Skidpad13

  1. S

    L2850 won't start with key after replacing o-rings on delivery valve holder

    Happy easter everyone. I've done everything we can think of here to get the old girl starting properly. I've got an L2850 that had bad fuel seepage from under the bonnets on the delivery valve holders on the injector pump. We've replaced those and the fuel seepage has stopped. However, now it...
  2. S

    L2850DT Fusible Link/Wiring Question

    Following up on this. I replaced the safety switch that was giving higher than spec resistance. Problem still exists. I'm charging & running the battery through a repair/desulfating cycle on my charger just in case. It's a 2019 battery so not that old. In the spirit of only fixing one thing at...
  3. S

    L2850DT Fusible Link/Wiring Question

    Well, that certainly explains the loud relay closing sound i hear whenever the key is turned. I didn't think it would be the timer relay to the right. I will probably do some voltage drop testing to see which configuration produces a higher voltage at the solenoid connection before removing it...
  4. S

    L2850DT Fusible Link/Wiring Question

    Thanks to everyone for the help. I think I've identified a big part of the problem. The previous owner intercepted the black & white wire coming from the safety switch & ran it up to a power block he installed & then brought another wire back down to attach to the spade you mentioned on the...
  5. S

    L2850DT Fusible Link/Wiring Question

    Yep, I'm a complete idiot. I was trying to figure out how to understand it and then your post clicked. It's a kubota so the wire gauge isn't shown as AWG but metric instead. Now I get it. The 0.5 is basically 20 ga stranded. Thanks for recalibration my head unit (ha)!
  6. S

    L2850DT Fusible Link/Wiring Question

    Thanks guys, seriously. I'm sure we all know this tune "I've got to fix ten things so I can fix the thing I really need to fix". I am planning on replacing the o-rings & gaskets for the injector pump delivery valves this weekend but I need it running to get it into the shop. If it was easy...
  7. S

    L2850DT Fusible Link/Wiring Question

    I'm guessing that it's where this red wire has been "twisted" together to "complete" the circuit.
  8. S

    L2850DT Fusible Link/Wiring Question

    Good morning folks, new member here. Recently got an L2850DT for a project after I'd sold my old MF30B. I needed 4wd. Anyway, it starts great, when it starts. Recently it's taken to not starting at all. Lights come on the dash but no sound from the starter. Only sound is a relay under the front...