Semo's latest activity
-
SSemo replied to the thread Nylon protective sleeve.https://www.amazon.com/gp/product/B09ZZFFY6G/ref=ox_sc_act_title_2?smid=A38Z015AJ7I755&th=1
-
SSemo replied to the thread Nylon protective sleeve.Decided to go with this for a try. Comments welcome. Yep! Just measured the fittings. Thanks for the reminder.
-
SSemo replied to the thread Nylon protective sleeve.Thanks Mikester, I assume you've ordered from this company before. What kind of quality would you say the sleeve material was? I called...
-
SSemo replied to the thread Nylon protective sleeve.Since I'm doing a lot of tree work, protecting the hoses is a nice idea, but protection from pressurized oil spray also sounds desireable.
-
SSemo replied to the thread Nylon protective sleeve.Thanks, I'm trying to get in touch with them to see if they have burst protection sleeve. Didn't see it described on their website.
-
SSemo replied to the thread Nylon protective sleeve.But the one at the bottom will provide more clearance.
-
SSemo replied to the thread Nylon protective sleeve.The fitting at the top of the cylinder is a 90 degree elbow. So I need to consider that.
-
SSemo replied to the thread Nylon protective sleeve.I'd much rather go with a sleeve that protects against rupture.
-
SSemo replied to the thread Nylon protective sleeve.I'd much rather go with a sleeve that protects against rupture.
-
SSemo replied to the thread Nylon protective sleeve.I'd much rather go with a sleeve that protects against rupture.
-
SSemo replied to the thread Nylon protective sleeve.Thanks, will check it out.
-
SSemo replied to the thread Nylon protective sleeve.Thanks, just one hose per sleeve.
-
SI need to install 2 new hydraulic hoses on the thumb cylinder of my kx033 excavator. The hoses measure .80 in. dia. and I'm not sure...