SDT's latest activity
-
SSDT replied to the thread Thoughts or advise.There is no easy way. Obviously, you are not doing this in the field???
-
SSDT replied to the thread Test driving a somewhat broken disc harrow?.Both.
-
SSDT replied to the thread Using the drawbar to pull a trailer.Don't want to pull overhauling loads with three point hitch because hitch can raise while going downhill, potentially causing...
-
SSDT replied to the thread Bush hog keeps getting out of place.Bingo. Needs to go. Left stabilizer appears to be in place but do not see one on right side. Adding another to right side will help...
-
SSDT replied to the thread Lifting Arms for the belly mower on my Kubota B2620 will not lower.Verify that the lifting mechanism is not latched in the Up position as one would customarily do after removing the MMM.
-
SSDT replied to the thread MX5400 ROTARY MOWER SELECTION.Again, I would not recommend a rough-cut mower wider than 6' for the reasons previously mentioned.
-
SSDT replied to the thread MX5400 ROTARY MOWER SELECTION.Tractor mowers, even HD, rough-cut mowers, are not designed to mow rocks. Regarding rotary cutter weight, read and adhere to the Kubota...
-
SSDT replied to the thread Mower deck won’t raise.Does the three point lift work? If so, the mower linkage is misadjusted or damaged.
-
SSDT replied to the thread 60" deck on a B6100.I do not believe that Kubota offered a 60" deck for the 6100. Perhaps a 54", but again, not certain. In any event, a 60" deck is too...
-
SSDT replied to the thread Is LX2620 Enought Tractor.Of course, and it would have been more accurate if I had typed "cast steel," or simply "cast" rather than "cast iron," but most laymen...
-
SSDT replied to the thread Is LX2620 Enought Tractor.Bingo.
-
SSDT replied to the thread Is LX2620 Enought Tractor.Think you will find that the L has a cast iron transmission/rear axle rather than steel.
-
SSDT replied to the thread Is LX2620 Enought Tractor.The LX 2620 has more than enough power for a 48" rough cut mower in most conditions, but I would not recommend anything larger. It will...
-
SSDT replied to the thread Upgrading from the beginning.If you want to be CERTAIN regarding garage door clearance, you will need to measure. FWIW, I would certainly not add a turbo to any...
-
SSDT replied to the thread Kubota b1750hst transmission fluid.That's what's in mine.