Recent content by Sandman99

I have a 6100 D, I think its about 1977 or so The rating is 14 HP. How much torque would it make? Best guess on the web is 24 Ft pounds of torque Does this sound correct?

I have ballast in the tires now what increments should I be trying20 pounds or 50

6100 D

Ok an up date I did try to shift into 2 WD when moving. It went into 2wd and back to 4WD very easy. As I remember I get tire hop in loose snow & only when backing up

Ok all good points I will do some experimenting Interested to see if I can shift out of 4WD when moving IF it was easy to get to the clutch I would take a look at that but not unless I have to ! Call me chicken!

I have ballast in the rear tires and the blower is off the ground usually in the hi position witch is about 6 inches when reversing The tractor is 4 WD I would presume the front tires a slipping some Thanks

Hey having this issue for a few years ever since I got my tractor a 1977 ? 6100 d manual trans with snow blower on the front. When I back up in snow the tractor hops! The only way I can over come this, is to let the clutch out slower than my previous engagement. If its slow enough and when...

Hey what about having a flange machined with proper ID & thread then silver solder it on Also risk of explosion is good when doing this fill the crank case with argon first choice or exhaust gas.

Hey rebuilding my front axle on my 1975 B 6100 F.W.D # 1 I have bought all the seals and gaskets but the new wiper for the ball (I don't know what to call it ) has a flat side and an indented side that the original does not have. What side faces the ball? #2 what gear oil should be in the final...