Russell King's latest activity
-
RDaren Todd
-
RRussell King replied to the thread Pto pump shaking badly? Why.@D2Cat I recall that some member on here works for some company that deals with pumps (rental?). I believe he repairs the pumps. I...
-
RRussell King replied to the thread Pto pump shaking badly? Why.Then it is probably the impeller has lost a vane or caught something on a vane
-
RRussell King replied to the thread Pto pump shaking badly? Why.No idea what you are physically describing so you might want to post pictures. But since you’re using some type of PTO drive shaft, are...
-
RRussell King replied to the thread B6100 fel, hyd pump, drive, and mounting bracket. Possable doner models?.And you can probably run a loader off of the hydraulic pump on the tractor.
-
RRussell King replied to the thread B6100 fel, hyd pump, drive, and mounting bracket. Possable doner models?.I think you would be watching for those parts to come available for a long time! See these two threads for ideas on how to get it done...
-
RRussell King reacted to couleedude's post in the thread What size wrench. Large locknut on adjuster bar for boxblade with
Like.
So, what is happening is that this nut is coming loose while doing bumpy work, then my boxblade goes to an angle that is less than... -
RSo I finally managed to connect the front power lift with the hydraulics. It is possible to operate the single action cylinder with the...
-
RRussell King reacted to TheOldHokie's post in the thread Adding a universal loader attachment to kubota L2202-m with Like.
They are in the loader manual which is a free download from TYM.. Dan
-
RRussell King replied to the thread Adding a universal loader attachment to kubota L2202-m.Snap pictures of the FEL valve and @TheOldHokie can (probably if the picture is “good”) identify the ports that you need to use
-
RRussell King replied to the thread Odd noise.Post your video on YouTube or similar and link to here (no video storage here).
-
RRussell King replied to the thread Adding a universal loader attachment to kubota L2202-m.Here is my L185F configuration using the block I refefenced above. Red comes from the pump, block diverts it to the red hose that...
-
-
RRussell King replied to the thread Adding a universal loader attachment to kubota L2202-m.Kubota requires open center valves so be sure the TYM valve is open center which allows the pump to just move low pressure fluid through...
-
RRussell King replied to the thread Adding a universal loader attachment to kubota L2202-m.Another thought on how you can do this, if you have access to machining tools. 1) Remove the existing high pressure line completely. 2)...
-
RRussell King replied to the thread Adding a universal loader attachment to kubota L2202-m.Is there a rectangular block (two pieces bolted together) in the pipe you indicated? It might be on to of the tran case and brazed into...
