rudder35's latest activity
-
Rrudder35 reacted to 85Hokie's post in the thread G2160 Battery draining + random stalling with
Like.
I would think you have a charging problem. While engine running....check voltage at battery. Should be close or over 14 volts -
Rrudder35 reacted to RMS's post in the thread Recommendations on a brand and model of grease gun with Like.
I also use a dewalt 20v grease gun and just added a locknlube adapter on it. Seems to work well on all of my equipment.
-
Rrudder35 reacted to JasonW's post in the thread Recommendations on a brand and model of grease gun with Like.
Most grease guns have an adjustable head to tighten and loosen. I have a few manual guns. One pistol style and a locknlube brand lever...
-
Rrudder35 reacted to MapleLeafFarmer's post in the thread New Owner L3902 - Constant Beep after starting - 67 hours with Like.
Doesn't appear to be a recognizable code on this end. Without a good code we would only be guessing. My guess its in a regen required...
-
RCheck that all levers are in off or nuetral, you may have one out of place for starting. You can hold the key at the start position and...
-
Rrudder35 replied to the thread Hydraulic Hose Connections.See...
-
Rrudder35 replied to the thread Hydraulic Cylinder (Repair or Replace?).Try here https://surpluscenter.com/hydraulics/hydraulic-cylinders/
-
RWill this help?
-
Rrudder35 reacted to GeoHorn's post in the thread Repair case where tie rod (ball joint) connects? with Like.
Ever hear of “Isky Cams”…?? Ed “isky” Iskenderian July 10, 1921 – February 3, 2026 Beloved Hot Rod Pioneer, Entrepreneur, Mentor...