Recent content by roundrockcrawler

  1. R

    Clutch not dis enguaging under load

    Engine is running, under full power
  2. R

    Clutch not dis enguaging under load

    Guys when my tractor is in a bind, the clutch position makes no difference, it always and only happens in 1st gear, so it just spins out, you physically have to yank it out of gear to stop forward motion, Iv adjusted the clutch slightly to see if there was any free play, with no noticeable...
  3. R

    Clutch not dis enguaging under load

    I have a L-3400DT standard 8 speed trans 4x4 2004 model 425 hrs , when using loader pushing trees and dirt into large piles and really working the tractor, on occasion the clutch will not disconnect power from the wheels, I can't get it to stop pushing and have to force "yank" it in to a...
  4. R

    Clutch Linkage adjustment advise L-3400

    I'll try the free play today I don't think it will take much to correct, thanks for the advice.
  5. R

    Clutch Linkage adjustment advise L-3400

    I have a 2004 L-3400 390 hrs four wheel drive and loader, with standard 8 speed trans, I also have a two wheel drive 2005 L-3400 with 360 hrs, the clutch on my 04 has to be fully pressed to the floor for a good clean shift through gears or from forward to reverse, my 05 works cleanly from 1/2...
  6. R

    For Sale 2005 L-3400 with Howse Rotary Cutter $7500.00

    Clean two wheel drive 35 hp Kubota, with AG Tires, front end weights foldable ROPs, has the standard 8 forward gears with low and high range, the pictures show it with turf tires but I'm keeping them to go on my L-3400 loader, this is a great tractor, I just needed one with a frontend loader...