Recent content by riddle2

Hi guys, I have a problem with propeller shaft joint. It seems to be that there is a loose sealing--> See attached picture. Can someone of you help me, how I can repair the joint? The problem is that there is only very few space. I have even problems to reach the joint with my hands. Is there...

Erik, Can you also give me the inner diameter? Thanks. Tom

Thank you. And Inner diameter? Bye, Tom

Thank you so far guys. @Kubota Christian: I'm looking forward to your dimensions. I think my problem is also the inch topic. I already measured something, but with a metric device and the values are very strange. Something around inner diameter 35,6 mm and outer diameter 38,3 mm. Bye, Tomas

Can you help me? Below I posted the reason. Thanks in advance. Tom

Hi guys, Thank you so far. I need the dimensions, because I want to build up my own vertical exhaust pipe. Because in my opinion, the aftermarket model is too expensive. I want the vertical version because I don't want to have exhaust fumes in my face any more. Thank you for finding out...

Hey guys, has someone got the drawing with dimensions of the vertical exhaust pipe? I mean NOT the muffler, just the dimensions of the vertical (not horizontal) exhaust pipe? Thank you so much in advance. Best Regards, Tom

Hey Lil Foot, very helpful links. Thank you very much!!! Bye, Tom

Can you please explain me how to tighten the bolts? Thanks

Hi Guys, I think that my rear wheels are very lose. Is there a possibility to tighten them on the axis? There is a screw on the hub. Is this screw for tighten the wheel on the hub? Thank you in advance for your help. Best Regards, Tom

Thank you so much for your help guys!!!

o.k. thank you very much. And what is with the central pin? Tom

It's a 4wd. So if I have a 4wd, I have no grease nipples for the central pin and no grease nipples for the lower King pins? Best Regards, Tom

Hi Guys, I really need your fast help. I bought a Kubota B7100 and I wanted to lubricate the grease nipples. But I can't find the grease nipples for the central pin and also not for the lower King pins. Is anyone able to help me? I don't want to "injure" my tractor by driving with no...