Recent content by Ric

Had a similar issue with a truck. Went through many fuel filters only to find out that the elbow at the inlet of the fuel filter was clogged. Try pulling the hoses and check that they flow freely and that the fittings are clear. Other thing that comes to mind is that fuel line is sucking air...

Got the old pinion out, now have to separate it to get the collar between the bearings off. Also have to remove the diff to change the bevel gear and clean everything up. Should the diff just fall out or will it need some persuasion? Also when assembling the pinion and bearings, what is the best...

Started looking already. Ring and pinion set is about $500

Back at the shop today and think I have found the problem Now to go look in the book to see how to get it apart

Got it up on a lift this afternoon and slipped back the prop shaft cover. turning both wheels in the same direction I can feel some crunches and the shaft is not turning. Turn the shaft and I can feel some intermittent resistance when the wheels move, definitely not smoothly. Will have to dig a...

Still waiting on a response from the original poster

Because there are two people here that want it (maybe even more) and I want to be fair to each of them. Cutting it in two is not really an option. How would you propose giving them both a chance to get only one item?

This is what I have. Not really sure what Kubota it was originally for, but I used the seat on my L4240 with a little modification and this has been in the shop ever since. Will have to look into shipping estimates but I might throw it on ebay at a crazy low starting price if there is that much...

So had a few min to look at the tractor today after the snow. Lifting the front axle off the ground with the FEL and moving forward or reverse the tires are spinning with no unusual noise. Driving with all wheels on the ground in 2 or 4 all wheels go around but pushing into a pile there is no...

L4240 HST I was not on the machine but this is what I know so far- Driving on hard surface to transport about 1/2 mile with front axle engaged (first problem) the wheels locked up. I show up, put it into 2 WD and tractor moves again. In 4 wheel drive machine tries to move (can tell engine...

Not too long ago I scored a seat on ebay that came with the suspension. Since I was only in need of the actual seat, I think I stashed the suspension mechanism somewhere in the shop but I do not recall what machine it came from. Get some bolt measurements together and I will see if I can dig it...