Recent content by Rexr

They did I think he said the minimum specs was 1700 and I think the high was around 2600, I'm not exactly sure on the numbers but mine was in between the high and low so they did not do anything else with the steering since it was within specs. They are checking with kubota to see if there is...

Getting the pressure up to 2900 helped the loader but no change on the steering. Rex

Those are all nice suggestions but doesn't it seem odd to you that you would have to tint windows, add insulation to the top of the cab, add an electric fan to a brand new tractor to get the air to half way work. Two of my neighbors do hay with new holland tractors and they both stay cold with...

I dont know, the loader valve was changed because the loader leaks down, to me that doesn't seem like a pump pressure issue but now they think it may be related after the loader continued to leak down with the 2nd valve. Maybe they will get lucky

They are suppose to pick it up monday and say it should be back in a couple of days. I will let you know how it turns out. Which tractor do you have?

I have talked to them about the separate steering pump and they seem to think that turning up the pressure on the lift side of the pump will help the steering too, my comment to them was if that fixes it I will be happy but I dont see how that will change the steering. They are going to check...

So the owner of the dealership came out to the farm today to check the hydraulic pressure, kubota claims that it has 2900psi but it tested at 1600psi, he thinks turning this up good be affecting the other issues that I have written about here. If you have a kubota you may want to check your...

I have a sickle mower that has a hydraulic cylinder to raise and lower the cutter bar, if I raise the bar up all the way with the cylinder fully retracted, the cylinder moved out 3/4" in 8 minutes there are no external leaks that I can see. It seems to me that the remote valve is leaking by the...

So the dealer replaced the loader valve and it seemed better at first but after using it with a grapple it is about the same again, also all 3 remotes on the back are leaking internally one of them let the rod move out 3/4" in about 8 minutes with a very light load, if I pull the cylinder in and...

Do you have to keep raising the loader if you are just driving or mowing with the cab tractor?

So now my loader has started leaking down while running, measuring the lift cylinders it moves a 1/4" in 15 or 20 minutes with an empty bucket, dealer said it was the cylinders so I took them in and they rebuilt them but I'm pretty sure it's still doing it, got to check it better. La1154a, 120 hrs

I think you are right, my bosses jd 5076e does the same thing if you are sitting still.

Hey, Does your M4 have a mechanical link between the steering wheel and the front tires? Rex

On mine if you sit still on grass it turns about a quarter of the way and stops either way until you move and if you sit still and slowly turn the wheel the tires dont move with the loader up off the ground. Going down the highway I have to constantly turn the wheel to the left, not momentarily...

If you follow the lines from the oil cooler up front they run above the right side of the engine(if you were sitting in the seat) the relief valve is connected between the 2 lines, maybe your dealer is familiar with it. It does seem like it goes with the 4wd but sometimes it does it for no...