Recent content by red347lx

You sir were 100% correct. The bearing behind the gear that drives the chain exploded...in for repair now! Thanks for all the replies and I sight everyone. It is greatly appreciated. Sent from my SM-G950U using Tapatalk

As you can tell, it's been very well maintained ***129322; Sent from my SM-G950U using Tapatalk

Here is a problem..not sure where it's from or what I need to replace Sent from my SM-G950U using Tapatalk

Took the cover off, chain and sprockets look great, next up. Remove the gearbox[emoji848] Sent from my SM-G950U using Tapatalk

No it won't spin by hand Sent from my SM-G950U using Tapatalk

The sheer pin appears to have been replaced at some point with a normal bolt. I can't spin the input shaft on the gearbox by hand when the clutch shaft is not on.. Sent from my SM-G950U using Tapatalk

Here's a quick look at what is happening http://cloud.tapatalk.com/s/5af047672e42a/20180507_083149.mp4 Sent from my SM-G950U using Tapatalk

Thanks, I did check that out, but didn't find a diagram of the gearbox on top of the tiller. I'll try and search a little further tomorrow. Weather is supposed to be fair tomorrow, hopefully I can get it figured out then. Sent from my SM-G950U using Tapatalk

I can check, where would the shear pin be located? Sent from my SM-G950U using Tapatalk

BL60c is the tiller model # The PTO works fine with or without the tiller attached. The gearbox shaft on the top of the tiller spins when the pto is engaged which I believe means something isn't right in the gearbox itself... Are parts available for these still? Sent from my SM-G950U using...

Also, with the tiller raised, I can spin the tines without the driveshaft spinning. That doesn't seem right to me... Sent from my SM-G950U using Tapatalk

First of all I am a tractor newby..baught a house that came with a Kubota b2150 with tiller, blade and mower deck. Tried hooking up the tiller today and I am having issues with it. All hooked up correctly, but the PTO doesn't drive the tines . It engages the rear spline on the tiller but just...