Preston's latest activity

  • P
    Preston replied to the thread BX2380 engine / fuel issue?.
    Thanks. Yeah I think the relocation kit is a very good idea, I might, but I’m not sure necessary since I’ll actually be solving the...
  • P
    Preston replied to the thread BX2380 engine / fuel issue?.
    Any chance you could post a picture on you placement of the hole on the top of the tank?
  • P
    Preston replied to the thread BX2380 engine / fuel issue?.
    Hey, what was the verdict of the tech coming out? Get it fixed?
  • P
    Preston replied to the thread BX2380 engine / fuel issue?.
    I did that. Fuel flowed fine, so junk in the tank that randomly gets lodged in the inlet.
  • P
    Preston replied to the thread BX2380 engine / fuel issue?.
    Nice good call! HOW is something scaled and rusty in the fuel tank not a recall issue?
  • P
    Preston replied to the thread BX2380 engine / fuel issue?.
    haha the “Hope I make it” is exactly that feeling! Storm rolling in and trying to get 5yrds of dirt off the driveway and bam, chug chug...
  • P
    Preston replied to the thread BX2380 engine / fuel issue?.
    Yes I drained the tank and lifted up the right side with the outrigger so I could get all the fuel and try to get all the sediments. If...
  • P
    Preston reacted to Joe.G's post in the thread BX2380 engine / fuel issue? with Like Like.
    Its a 90 Degree fitting I believe no screen just a hole almost flush with bottom of tank. I am glad I cut the access panel, it seals...
  • P
    Preston replied to the thread BX2380 engine / fuel issue?.
    Good to know thanks! So all the problems solved? I had it die once so decided to bleed at the engine and back track each connection to...
  • P
    Preston replied to the thread BX2380 engine / fuel issue?.
    G Good idea! I do have a borescope and used it. It’s a really hard bend to see to the bottom when intake is, I couldn’t get it to...
  • P
    Preston replied to the thread BX2380 engine / fuel issue?.
    Hey Spring, I’m new to the forum so excuse any errors while trying to respond to this message. So I’m having the same issue. Replaced...