Recent content by powersrp

I also believe adding additives to fuel increases regens

My bx2680 was delivered with a Ldmd pride RBO560 back blade, seems shoes arent available for this model, any one know if he shoes from the other series would fit? i don't know the spacing of the bolts, but it looks the same between the dif lines. TIA

Just a thought, check your cab mounts, there are 4, rubber bushing type, under the floor at each corner, if i didnt know that these cab mounts were kinda sloppy, id think there was something wrong, my cab will move around when i get in to the rougher parts of the yard. Sent from my iPhone...

My B3350 will shame anything below it, and hasnt cost me a dime in 4 yrs Sent from my iPad using Tapatalk

And the point being,with the non social distancing, non masking thats happening now, Who knows whos healthy and whos carrying? Until theres symptoms, then its too late. How many people have spread the virus because they didnt know they were carriers? I live in a small town, we have stayed ar...

check out, interstate plastics, they have any kind of pvc or humv type materials that a person could want, I would think you could make those pieces out of 1/8 or something. If you sent them these photos they would point you in the right direction. Just a thought. Sent from my iPad using...

The grease nipples are 11mm, thats not a guess, and on the nipple i tightened and the one i replaced you need a wrench after getting it started, i guess i was lucky it stayed put for a few yrs before falling out. Sent from my iPad using Tapatalk

I have 650 hrs on my tractor and grease it regularly, while cleaning things up the other day i noticed one grease nipple gone on the FEL and another a few turns from falling out, had to remove loader pins to pull arms out far enough to get new grease joint on. 11mm wrench and check them all...

Hooking up the 3 point mower, it never fails your gonna get grease on you from the wheel spindles while hooking up the drive shaft, how about sum plastic caps or something, i spent a cpl hours the other day cleaning them up but first time i grease it, mess again Sent from my iPad using Tapatalk

Amazon, its a 5 gal sure can, $44.00, buts its well worth it. Sent from my iPad using Tapatalk

I cleaned up my FEL, also the spindles and wheel axles on the 3 point mower, the grease mess was getting to me, and hooking up the mower always ended with grease on my clothes, i dont know if there is a messier task on a tractor than trying to get the old grease out of those FEL joints. Sent...

Very wise words, that i repeat every day Sent from my iPad using Tapatalk

Thats the answer i was looking for, thank you. Sent from my iPad using Tapatalk

Its hard enough to find reg diesel around here, i can tell you bio diesel has never touched my 5 gal jugs. 3-5 seconds with or without glow plugs is my norm. And in 4 years no emissions problems, nothing, it does whats its designed to do. Sent from my iPad using Tapatalk

1/2 throttle? maybe im not giving enough throttle during starting Sent from my iPad using Tapatalk