PoTreeBoy's latest activity
-
PPoTreeBoy reacted to Hugo Habicht's post in the thread Seeking: spreader bar / load control shaft with
Like.
Nothing wrong with your threaded bar, I think. It only prevents the lower arms from rattling around when there is nothing attached. I... -
PPoTreeBoy replied to the thread BX ROPS question.Kubotausa parts shows NLA for the 1880 and 2380. I suspect you have to jump through special hoops to get one from Kubota. Maybe one of...
-
PPoTreeBoy replied to the thread Seeking: spreader bar / load control shaft.You have Cat 1, so 7/8" diameter by 27-28" spacing. You could buy a 7/8" round bar and drill holes or buy a draw bar if it doesn't have...
-
PPoTreeBoy replied to the thread BX23S Loader Lift Issue & hydraulics getting hot – Seeking Diagnosis Help.Also make sure your 3pt control is returning to its neutral position correctly. You may be able to find the problem area by starting...
-
PPoTreeBoy replied to the thread Kubota L200 Rebuild.Did you remove the pistons? What new parts?
-
PWelp...It runs!! As a matter of fact it runs pretty nicely too! Hard to believe that just 7 days ago this was a rusted relic frozen...
-
PPoTreeBoy replied to the thread L4200 pto problem.Also check those passages in the plug for restriction.
-
PMore progress today. I got the motor out and onto a stand. Removed the head. Cylinders appear to have some scoring. I had to fabricate...
-
PPoTreeBoy replied to the thread L4200 pto problem.Assuming port 5 is where OP has 370 psi, I concur. Unless something is amiss there, I think disassembly is the next step.
-
-
PPoTreeBoy replied to the thread L4200 pto problem.I've been following along here, somewhat blindly since a WSM isn't readily available. Also, it might help to know which transmission you...
-
PPoTreeBoy reacted to GreensvilleJay's post in the thread Wiring Diagram Wire Descriptions with Like.
yeah, area not diameter..silly Canada is 'kinda Metric', just like my BX23S ! Wonder if they squish the wires 'square' to make the...
-
PPoTreeBoy replied to the thread Root cutter.My first thought for trimming limbs was to mount something like that on the loader. For that price I would have jumped on it!
-
PPoTreeBoy replied to the thread L3600 engine rebuild.I'd recommend taking several pictures. It may be a while before it goes back together, and if your memory is anything like mine . . .
-
PPoTreeBoy replied to the thread Wiring Diagram Wire Descriptions.I thought the numbers were the area in sqmm. In any case, here's a conversion chart.
-
-
PPoTreeBoy replied to the thread B3000 gray tractor.You typed B3000 but your signature info says B6000. I don't think either are gray market, but could you give the full model number of...
