PoTreeBoy's latest activity
-
PPoTreeBoy replied to the thread M5640 Hydraulic Filter usage.Those are suction filters, piped in parallel so they both serve all functions. Two filters are required for the higher flow rate.
-
PPoTreeBoy replied to the thread L4310 only steers one way?.I think you win the prize.
-
PDid the shop possible assemble the steering cylinder with the barrel reversed?
-
PI've just measured the range of motion for a LA344 (which is roughly what I'm copying) from screenshots from a video I found on YouTube...
-
PPoTreeBoy reacted to Hugo Habicht's post in the thread Hot when mowing - B2400 - Cools off if I stop moving (even with blades going) with
Like.
The "throttle" of the engine is controlled to keep constant revs. When you are mowing the engine has to work way harder than when you... -
PPoTreeBoy replied to the thread Need RTV X2 WSM Help!.Take a thumb drive to your dealer, remind him how good a customer you are, and maybe he'll give you a copy. Seriously
-
PPoTreeBoy replied to the thread M5700HD Shuttle Issues.Sounds like a good plan. I doubt it's check valves, but they're easy to look at. If you're close to a dealer and they have the test kit...
-
PPoTreeBoy replied to the thread personal protection in the heat, ticks, poison ivy?.Heat - cab with AC (no, I don't have one but a canopy sure helps). I wear shorts and short sleeve T shirt. I may try some shirts the...
-
PPoTreeBoy replied to the thread Front loader for a B7200.I think you're planning on building your own bucket so this would't matter, but if you're going to be using commercial attachments it...
-
PPoTreeBoy replied to the thread Front loader for a B7200.I think those links could give a greater range of motion, but the TL720 loader specs on my L35 are +45° and -45°, less than Chim is...
-
PThe bad news is that when the forward pack was operating with low pressure, the clutch pack was slipping and has toasted some of the...
-
PPoTreeBoy replied to the thread M5700HD Shuttle Issues.Well, the pressures check out, indicating the cooler relief and PTO clutch relief valves are working correctly. I've tried to come up...
-
PPoTreeBoy replied to the thread B7800 with 600 hours over heating..Going to keep us in suspenders . . .
-
PPoTreeBoy replied to the thread M5700HD Shuttle Issues.First, it sounds like you have a WorkShop Manual, but, if you don't, you can download it at KubotaBooks. The HD model gets its own...
-
