Recent content by Popgadget

my L6060 burns about 1.7gph mowing with a 16 foot finish mower. I never though I needed less power.

I have a 60” Wicked on my L6060. I didn’t like the wait, but it was worth it. One of the big advantages is the lighter weight without sacrificing strength. While I was waiting for mine I used a borrowed Virnig with a double lid. No complaints on the quality, but it was beastly heavy by...

I made one for my Digga that is on wheels and holds a couple augers as well.

Ive got a Digga 1DSS rated for 6-16GPM. I’ve got it on the LA1055 loader on an L6060 and plumbed into a factory third function. it exceeds my expectations and is much better than the 3Point unit that it replaced. I strongly suggest getting a mount that lets you position it offset to either...

its worth waiting for Brian. His service, knowledge and product are second to none.

I get mine here- https://www.fallline.com/ last one I got was 96x8x1-1/2.

I’d weld the plate on and go for it!

I have the fit rite on my L6060 and it is perfect fit and the stroke is exactly right as well. It was worth the wait for me.

Use pins rather than bolts, adjust the top link in, or get a hydraulic top link.

60” EA Root rake grapple on a L6060 works great. I have no regrets.

I’ve got a QH15 and am happy with it. I did use some cheap bushings from TSC for some implements. I had two old non standard ones, a King Kutter 84” box scraper from the late 70”s and a ballast box of similar vintage. I cut the lower ears off of them, fabricated new ones and welded them on in...

I would heartily recommend this hydraulic quick connect for the 3rd function implements, it’s a Kubota option. There is also one available with 8 ports to connect the loader with the third function lines as well. I can dismount the LA1055 in under 2 minutes, and mount it in the same amount of time.

I pull a 16 foot Progressive TD65 behind an L6060. i set the cruise control for about 4.7 mph, fuel consumption is typically under 2 GPH, as low as 1.2 if the grass isn’t very tall.

https://www.delcity.net/store/Wire-Connectors-&-Quick-Splices/

Primeweld Cut 60