Recent content by PhoenixRising

here are three pictures of the top of the circuit board

Picture for the above post here are two pictures of the underside of the board

The sad finally -- So here is the conclusion to this problem as I see it. First to clear up a few comments made above, 1) The battery was connected at all times, 2) discussing this problem with the shop that fixed the alternator, we believe that one half of the Diode Bridge failed and that...

The burn marks are on the Circuit Board, I only took the back of the Panel off exposing the underside of the circuit board, tomorrow I am going to take it apart further and see if it can be fixed. I also see the replacement price -- Wow $853.43, I am certainly going to try to fix it and make...

I found it! Disconnecting the connector from the IntelliPanel (Electronic Instrument Panel) solve the dead short in the wiring. Looks like the IntelliPanel is shorting that circuit to ground. I took the back off the IntelliPanel and the pin 9 of the B connect looks burned. I guess I will...

Hi sorry for the delay in replying. Dave and 200mph The transmission is the HST and it is a ROPS model and yes the alternator is out and the test I did are with the alternator disconnect and removed, the fuse still blows when the key is turned on.

Hi, This problem started with my tractor not charging, the 7,5 amp Alternator fuse was blown and the display panel with dark. I removed the alternator and took it to a repair shop that found the Diodes where burned out. So that is one part of the problem. However with the alternator removed...