Recent content by Ossekeag Orange

Hi Everyone Here is the status update on the jerky rear hydraulics on the L2880 3ph snow blower attached to my L6060HST tractor. The local Kubota dealer has encountered this problem on occasion in the past and it was sometimes associated with a slight mismatch in the quick disconnect...

" I will do a search - but what keeps the pvc pipe on the bottom. Do you guys drill and bolt the pipe in? or will it stay put? (I'm thinking if I back up and -------------------------------------------------------------------------------------------------- forceten - I use a similar pipe...

MtnViewRanch: The pn you provided is for a .062in orifice. You are suggesting the .031 in orifice though, correct? My hoses are 3/8in hoses. If I understand you correctly you are suggesting unthreading the current male quick-disconnect connector coming from the blower and inserting the...

Bulldog: I am not sure what you mean by feathering but if feathering the controls means a gentle touch on them I still get the same undesired result at tractor rated rpm speed for the snow blower. However, both deflection and rotation work fine at idle speeds.

OK. Hi Everyone. Here is where I am at with resolving the issues associated with the herky jerky hydros on my L6060 (HSTCC) Tractor/2880 Snowblower combo. Hydro Filter: Dealer had just replaced that for me as I had them do the 50 hour service on the tractor to ensure any subsequent...

Thanks Diydave. Hopefully you are correct. I will find a manual to download to get me through finding and cleaning that screen. Fingers crossed here that it is a simple fix that corrects this.

I have a 2015 Kubota L6060 with attached Kubota 80 inch rear snow blower equipped with hydraulics for both Chute deflection and rotation. Whenever I activate the levers from the tractor for either chute rotation or deflection, rather than getting a smooth operation for deflection and rotation...