Old Machinist's latest activity
-
Old Machinist replied to the thread LX3310 Power Beyond Banjo Sizes???.I asked TTWT if the Kubota third function lines on his LX3310 were 3/8" or 1/2" and he said both the supply and return were 1/2". When... -
Old Machinist reacted to TheOldHokie's post in the thread LX3310 Power Beyond Banjo Sizes??? with
Like.
The links I provided are for a source of supply. You need to verify the exact fitting sizes you need before ordering. Dan -
Old Machinist reacted to TheOldHokie's post in the thread LX3310 Power Beyond Banjo Sizes??? with Like.
They are standard fittings available from most supply houses...
-
Old Machinist replied to the thread LX3310 Power Beyond Banjo Sizes???.You wouldn't happen to have links to a source for both would you?
-
Old Machinist replied to the thread LX3310 Power Beyond Banjo Sizes???.I don't think he is saying those two sizes are interchangeable. What I read it to say is the PB port is -08 ORB and the return...
-
Old Machinist reacted to TheOldHokie's post in the thread LX3310 Power Beyond Banjo Sizes??? with Like.
I dont know for a fact but those banjo bokts are also used in B and BX tractors and in a recent thread the valve PB port was identified...
-
Anybody know the sizes of the two banjo connections for the power beyond tube on a LX3310? I am planning a home brew third function and...
-
Picked this up off FB for $500. I gave the lady an extra $50 for bringing it to my house since she was 2.5 hours away from me. She was...
-
-
Old Machinist replied to the thread Quieting your garage doors.I filled all my panels with the thin bubble wrap type insulation a few years back and got the same results. The stuff weighed nothing...
-
WOW! Time flies by fast, I started out on my front field which use to be a hayfield, about 6 acres, I was mowing it with my commercial...
-
This is exactly what happened today. The box blade just pulled clods of grass making ruts
-
Old Machinist replied to the thread Kinda a dumb question for a "real machinist", but…….here it is anyway..All of the dial indicators I have ever used with an adjustable contact point had a detent you just had to push hard enough to overcome...
-
Old Machinist reacted to Lil Foot's post in the thread Kinda a dumb question for a "real machinist", but…….here it is anyway. with Like.
I must own a dozen indicators of that style, and have used or repaired probably another 50+ company-owned indicators of that style, and...
-
Old Machinist replied to the thread Leveling out a field.I have also had some luck pulling a drag behind my tiller. The right side of this photo was done without the drag attached.
-
-
Old Machinist replied to the thread Leveling out a field.A tiller and drag work great but you have to get it down to dirt. The last time I did a significant area I had to use my lawn sweeper to...
-
