Old Machinist's latest activity
-
Old Machinist reacted to Russell King's post in the thread BX25 - changing the heel/toe to a side x side? with
Like.
See this thread for one way to change things... -
Old Machinist replied to the thread BX25 - changing the heel/toe to a side x side?.Buy a JD, NH, TYM etc.
-
Old Machinist replied to the thread Lx3310 Strong Exhaust smell/odor.Funny thing is mine has stopped doing it and I haven't had the TSB performed to address it. I'm going to go with it just needing time to...
-
Old Machinist replied to the thread Dipping toes in the world of Welding.I bought one of these this year. I already had the gas bottle from my old Lincoln. I went ahead an put in the 240V circuit to run it at...
-
Old Machinist reacted to North Idaho Wolfman's post in the thread Is the PTO shaft coming off Kubota and JD tractors common 1-3/8? with Like.
Snow blower, Broom, and just about any other front mount PTO powered implement. Also note: The rear PTO spins at 540 RPM, where the mid...
-
Old Machinist replied to the thread Is the PTO shaft coming off Kubota and JD tractors common 1-3/8?.If you have a mid PTO it will have a finer spline. All of the rear PTOs on compact and farm tractors will be the 1-3/8" 6 spline.
-
Old Machinist replied to the thread A little Machinist advice please.You might could drill it out and bush it. Are you sure the shaft is metric? I would first measure the shaft and pulley diameter and try...
-
Old Machinist replied to the thread A little Machinist advice please.A new pulley or pulley repair in itself will not fix your problems. You will need to replace the pulley AND shaft and determine why it...
-
looks fantastic and your idea of fuel tank off a semi has me thinking as I have a highway tractor wrecking yard very close by. one...
-
Old Machinist replied to the thread Tool for Hydraulic Cylinder repair Question.I see this is an old thread but thought I would add some input anyways. Those u-cup seal installers may work for some but every time I...
-
Old Machinist replied to the thread Insurance.Where's Waldo? The last time I bought a car from a dealership it was worse than when I closed on the mortgage on my house. I've never...
-
Old Machinist replied to the thread Mid Mount Mower blades.I will also add that many of the generic blades are 3/16" thick rather than 1/4" thick like the originals. When I put Oregon brand...
-
Old Machinist replied to the thread FEL while mowing..My LX rides better with the weight of the loader on so I just leave the bucket off.
-
Nice! I took a little different approach when I made mine a couple years ago. Not saying my way was better, just another idea. When I...
-
Old Machinist replied to the thread Dipping toes in the world of Welding.I got by with and bragged on a 120V Lincoln SP100 for over 30 years. This year I upgraded to a Prime Weld 180 and I love it. Very...