NorthwoodsLife's latest activity
-
NorthwoodsLife reacted to NCL4701's post in the thread Offsetting rear blade ... should I grease it? with
Like.
Kind of reminds me of a manual fork rack. No grease requires hammer, kicks from sturdy boots, cussing optional. Lots of grease just... -
NorthwoodsLife replied to the thread Daily Chuckle.When he tears it up it will bring him to tears.
-
-
-
NorthwoodsLife replied to the thread Land Pride SGC0554 Claw Grapple Grinding Noise??.I agree. Hard to believe.
-
NorthwoodsLife reacted to TheOldHokie's post in the thread Land Pride SGC0554 Claw Grapple Grinding Noise?? with Like.
Might be nessy but I would expect grease to pass through. Push come to shove wrap some electrical tspe over the cotter pins. Dan
-
NorthwoodsLife replied to the thread Land Pride SGC0554 Claw Grapple Grinding Noise??.Thank you. 4 of the 6 rotating joint bolts are drilled thru the center perpendicular for Cotter pins!
-
NorthwoodsLife reacted to TheOldHokie's post in the thread Land Pride SGC0554 Claw Grapple Grinding Noise?? with Like.
Drill and tap the pins. #7 HSS drill x 2 = $1.60 1!4-20 HSS tap x 2 = $6.50 Dan
-
NorthwoodsLife reacted to Lil Foot's post in the thread New Headlights & Brackets for the B7100! with Like.
It has happened maybe 3 or 4 times in the last 30+ years, 0°F is about the normal low.
-
NorthwoodsLife replied to the thread New Headlights & Brackets for the B7100!.At 120F, nothing lasts very long. You could check the dash board condition on your car/truck and verify. Minus 18F? Really?! In AZ...
-
A 96-year-old woman's note to her bank! Priceless! The following is an actual letter that was sent to a bank by a 96 year-old woman...
-
NorthwoodsLife reacted to 85Hokie's post in the thread New Headlights & Brackets for the B7100! with Like.
One word !!! B r i l l i a n t
-
NorthwoodsLife reacted to ken erickson's post in the thread New Headlights & Brackets for the B7100! with Like.
I possibly may be interested in a set once you finalize and determine price. I assume 3d printed? Do you feel they will stand up to...
-
NorthwoodsLife reacted to Theuser's post in the thread New Headlights & Brackets for the B7100! with Like.
They are 3d printed. I'm still testing the first run, but if my math is correct they should resist diesel vibrations for a great many...
-
NorthwoodsLife reacted to Runs With Scissors's post in the thread New Headlights & Brackets for the B7100! with Like.
Nice job. Those 3d printers can come in pretty handy. I have not used ABS yet though. Only the PETG. I'm gonna have to start...