Recent content by NorthBC

Also wanted to suggest that your fluid level may be high. You mentioned a dipstick at the fluid add port, but my L1501 does not have a dipstick. To check fluid level, mine has a level plug on the left side of transmission near the clutch foot pedal. If the fluid trickles out very slowly when...

It seems that everything Vic related was deleted from the site. Every post and video from him is gone. Something must have gone on behind the scenes with ownership of the site. Would be good to know the story.

Filter is accessed from left side of tractor, on the bell housing of rear axle. Two bolts on a little plate directly across from suction line attachment on the other side.

I have the L1501DT (must be similar to L1500?) and just replaced the trans-hydraulic fluid and screen. Will post some photos below. Filter for L1501DT is part number 34150-37710. Filter was fully clogged and partially crushed from poor install of suction line. Am in Canada so had to order...

Just replaced the tachometer drive gear case on my L1501DT (L185DT). Part# 1G633-83302 and gasket 15296-88130. Am in Canada and could not ship parts from any US providers so ordered from my local Kubota. Parts are stocked in Ontario and shipped in a few days to me in BC. About $130CAD for...

Since it was over a year ago, you have probably already figured this out, but I am adding a comment here for future searchers! I have the L1501DT (L185DT) and the front axle looks the same as your L1801DT. The fluid in the outer drive cases are not connected with the axle fluid. The fill port...