Recent content by Nemx735

Yes they are just 4” round LED lights from eBay. They are 27w and don’t draw much which is why I picked them. Plenty of light and tons better then the oem lights. They are mounted through the side of the hood where I already had holes from the other lights previous owner put on it.

Well first update, tractor is all fixed up lots of new parts. The shift fork was the issue. Working on finishing the paint on the loader frame and rear wheels other then that it’s good to go! https://imgur.com/gallery/B3vc9kM

Parts have been ordered from messicks as well as some more super udt2

Now the question is how much do I need to take apart to get this damn shift fork out. It looks like the shaft for it comes out the rear side so I think I’ll have to split the range transmission from the diff. Unless the hole goes through to the diff

Of course they don***8217;t work now, they worked fine for a day. Guess photobucket is being deleted off my phone. https://i.imgur.com/6tgOmJI.jpg https://i.imgur.com/I8LHVXO.png https://i.imgur.com/mvA099v.jpg https://i.imgur.com/Y4rtnkI.jpg

So I got the thing apart enough today, heres what I found. (Bad pic links removed look at future post for pics) So the Fork is snapped, gears still slide nice into low and high range by hand. So good news is thats the issue and the Hydronic trans is good! So going to order the stuff Monday...

so I’m getting ready to split the tractor or atleast pull it partially apart because the I guess you could call it the bellhousing? The formed metal housing which the HST is inside off. Is blocking the front two bolts to take the top cover for the range transmission off. It looks like it has two...

Fluids changed after issue

So I took it outside(rolled it) to wash it up for any impending tear down that may happen and I noticed one thing that may make a difference. No matter what position the low/high range level was in L-N-H i was still able to push by hand the tractor with the same effort. Which now makes me think...

I can feel it click into low and high when I move the lever, unless something on the shift fork broke. I replaced the HST filter on top as well. Good amount of silver and goldish colored material in case where the strainers sat. Can HST material get into the main case? Or would it end up in the...

Any idea on what company would be best to contact about used parts for this

Yes the PTO stays running, TPH raises and the input is spinning when clutch is released. Damn guess I’ll be splitting the tractor. Really hoping I can just find a good used trans since I read a couple people rebuild theirs for a lot of money/ went the cheap route and didn’t fix it. Where is the...

I wish haha sorry no I meant that parking brake is off. If the cooler is clogged or hydro pump are bad can that cause the HST to not work

Yes it was set but I did release it. It rolls freely now

Hello forum, For my first post I unfortunately need to ask for help. I bought a 1981 B7100HST-D last Sunday, everything worked as it should and then I took it around my yard Monday morning and ran it through al the gears with no issues(high and low range since it’s HST). Parked it until...