nbryan's latest activity
-
NL1 tractors are an oddity and all on their own. And yes they are also referred to sunshines or ZL's They are built the same time as the...
-
NI guess this is a human thing right. I've been told, if your not making a mistake you're doing it wrong. 😜 😆
-
NTwo days ago, was the first time I removed the FEL from my new BX2380. I have done this numerous times with my old 2380. Where I park it...
-
Nnbryan replied to the thread Need to find out how to dismantle scraper blade pivot from hitch unit.The visible vertical pipe encloses a slightly smaller pipe. The smaller pipe is welded to the bottom of the upper adjuster plate (not...
-
Nnbryan replied to the thread Need to find out how to dismantle scraper blade pivot from hitch unit.It appears you'll need to cut off the blade mounting bracket at the weld with the rotating pipe. My only experience is with acetylene...
-
NYou will find it the day after Fedex delivers the new cap. ;) p.s.: at that price I would put a little chain on it. p.p.s: thank you...
-
NI have a number of pressure gauges, different ranges for different systems. One that I use a lot is a 3000 PSI gauge on a tee. one end...
-
NI had a transmission in a car I was working on one time do something kinda similar. It would shift fine until it ran for a few minutes...
-
Nnbryan replied to the thread What would you do?.Get B/B50/LX with a loaderand any 3-point tools you'll need, like a box scraper, and don't bother with a belly mower for it. I use a...
-
NPreviously I had a leak in my left front tire that I thought I had fixed. It still leaked slowly, and I had not found the source of the...
-
Nnbryan replied to the thread Steering center moves continually..A crowned road with a little loose or insufficient toe-in adjustment will pull you to one side while driving. The hydrostatic powered...
-
NSounds like a fuel delivery problem to me. What RPM are you running in? Is the fuel tank full? Sounds like your change fuel...
-
Nnbryan replied to the thread Box Scraper question.The tractor manual has the "operating" or best RPM to set at for most HP/torque. It's usually near the RPM that rotates the rear PTO at...
-
Nnbryan replied to the thread Thoughts or advise.Almost always the first run with new implement, or the first cut of the season, always finds the hidden tangle monsters. Wear tough...
-
NInvest in a heavy set of diagonal cutters with long handles for plenty of leverage and reach.
