Recent content by nashobadog1

Okay, The problem with the D902 is fixed. I pulled the injector pump and the fuel rack slide on the side was corroded and binding. Even though the electric fuel solenoid was energizing, it wasn't moving the rack due to the dirt grime and grit from Afghanny fuel. The fuel here is pretty bad from...

I would like to personally thank each and every one of you for the advice and the links to the manuals. Cabu, I have fuel at the supply to the injection pump. However, I have not cracked the bleed screw while trying to bleed the injectors. I will try that today before making the call to replace...

The electric solenoid is pushing the fuel control to the full fuel position.

Also, without the manual here, If memory serves me right. Before changing the injector pump, the #1 Cylinder must be in the TDC position?

I have access to a D905 and a D1105 Injector pump. Both look similiar to what I have on this unit. Professional opinions? Will these pumps work on the D902 ?

This unit does not have the hand pump. It has an electric pump. I have bled the fuel coming from the tank to the fuel filter, fuel filter to injector pump, injector pump thru return lines, rreturn lines back to tank. I have fuel going to the injector pump but no fuel coming from the injector...

I am a DOD contractor overseas and they have shipped me a new piece of equipment, A Mobile Tower, powered by a Kubota D902 Engine/coupled with a 5-10 KW generator. It has a deep sea integrated computer controller. They did not send any service,repair or parts manuals with this equipment. The...