Recent content by mzimbaro

We were able to weld it and I am back in service.

Okay that is only 7 hours away from me. I wish I had my serial number handy. That bracket is in a spot that is not easy to get to. I may just get in the habit of spraying the whole underside in oil as this is the second bracket that has broken. The parts are just too snug fitting.

Actually, I am going to try and get this part out and see If i can weld the pin back in.

Yes it is definitely 50. Anyone know of a parts dealer that can get that to Canada quick?

I got the broken piece out. As far as i can tell, it is part 10 and 20 in the third diagram. What I can't tell is what holds part 20 in place. It almost feels like it is welded in place. Also, in the diagram above the piece is straight while mine has an angle. My tractor is about 6 or 7...

Ok, how do I give 10 thumbs up for this reply? Thanks Wolfman.

I have a Kubota B3350 with a cab. I can no longer lift or lower my loader because something broke in the linkage. I believe I have all of the manuals but I cannot find the section I need. First off, what is the name of the arm that raises and lowers the loader? Second, what would you call...

My replacement switch came in but there is no way to get to the switch or the harness from under the tractor. It looks like there is a plate under the seat that may give access. Too bad it is -15C today. I am going to remove the seat and see if that does give easy access. I am just putting...

The starter wires were a real challenge to get to as they are behind the air conditioning lines.

My tractor died on my on the weekend and it turns out (I am pretty sure) to be a problem with the HST neutral pedal switch. I had to move the pedal back and forth for 45 minutes to finally get it to start. Now it has happened again only now i am parked in 6 inches of wet slush. I am just...

Thanks for replying. I don't have an operators manual. I bought my machine used with 105 hours on it. Yes, I believe I have followed the park regen instructions as it seems pretty straight forward. I recorded the events the second time I went through it but essentially I started the machine...

I bought a B3350HST about 18 months ago. At that time i was researching many models and didn't get a definitive answer on the issues with model. It seemed like as long as you keep the RPM's high, you won't have any issues. The first regen i went through was a real pain in the ass, mostly...