mrrlyoung's latest activity
-
Mmrrlyoung replied to the thread LX2610 50hr shop vac question.I just did my 50 hr service. I used a big shop vac pressed tightly into the hole, but didn't pinch off the breather tube. I tapped a cap...
-
Mmrrlyoung replied to the thread LX2963 Snow blower not level from left to right.Right front tire is 10PSI lower than the left. Let's hope that's the problem.
-
Mmrrlyoung replied to the thread LX2963 Snow blower not level from left to right.Thanks. Our ground is so gravelly (think sandy) that shoes or skids too easily dig in and we start throwing rocks. So we pretty much...
-
Mmrrlyoung replied to the thread LX2963 Snow blower not level from left to right.Yes, I'll check. Thanks for the reminder.
-
Mmrrlyoung replied to the thread LX2963 Snow blower not level from left to right.I can try that, but it looks like something ain't right, and I'd like to correct it if I can.
-
Mmrrlyoung posted the thread LX2963 Snow blower not level from left to right in Service, Repair & Maintenance.I just noticed when standing in front of our LX2963 snow blower on our LX2610 tractor that the blower is noticeably tilted a bit when...
-
Mmrrlyoung replied to the thread LX2610 block heater location.Can a glow plug be damaged by staying on too long?
-
Mmrrlyoung replied to the thread LX2610 block heater location.Thanks. It's on a smart battery maintainer between our infrequent uses.
-
Mmrrlyoung replied to the thread LX2610 block heater location.What about 'burning out' or otherwise damaging the glow plug if heated too long? I probably won't do anything, but I just saw dipstick...
-
Mmrrlyoung replied to the thread LX2610 block heater location.I moved away in 2011 after living there for 10 years. Loved the moose in the driveway but not so much the mountain lion tracks outside...
-
Mmrrlyoung replied to the thread LX2610 block heater location.Thanks. That's useful and answers my question. (I'm an ex-Sagle/Sandoint resident. I visit from far Northern CA whenever I can)
-
MWe run Kubota 15w40 since it fits our temperature range. LX2610hsd. I have an old 38 watt magnetic block heater that I'm thinking of...
-
Mmrrlyoung replied to the thread Is there a thick shop manual for the LX2610.I'll check what I have.
-
Mmrrlyoung replied to the thread LX2610 50hr shop vac question.Thanks. Sounds like you were in the 'tight fit' camp.
-
Mmrrlyoung replied to the thread Is there a thick shop manual for the LX2610.Thanks very much for your offer, but I have already obtained one through other means.