Mrlunchbox's latest activity
-
well, I was a loser, but not without bumping my max bid once a reasonable amount and then I cooled off. It was for the best..... I would... -
Ah, being aware of final cost is what one needs to be aware of when using auction houses. I've done the math and will determine my final...
-
How much can you afford to lose considering they will probably ding you a buyers premium and taxes on top?
-
I ran into someone looking for a snowblower for a BX22, and even though I do have a BX2750 snowblower that I am going to sell, it is not...
-
Mrlunchbox replied to the thread WTB - BX 2763A Snow Plow.Feel like driving to Pittsburgh? ha ha https://pittsburgh.craigslist.org/hvo/d/allison-park-kubota-snow-plow/7888371307.html
-
Mrlunchbox replied to the thread WTB - BX 2763A Snow Plow.Welcome fellow masshole! haha Good luck with your search!
-
Looking for BX2763A Snow plow with hydraulic angle control for my BX25D. I already have the BX2751 Male Quick Hitch on the tractor so...
-
Mrlunchbox reacted to Hugo Habicht's post in the thread BX23s rear differential replacement. with
Like.
They assemble everything and then it gets a coat of paint. Was the same on my tractor (built around 1990), some parts got no paint, but... -
Mrlunchbox reacted to Old Machinist's post in the thread LX3310 cab model loader knob (grip) removal with Like.
Thanks for the confirmation
-
Mrlunchbox reacted to dirtydeed's post in the thread LX3310 cab model loader knob (grip) removal with Like.
If you're looking for a nicer/comfy knob, here's what I used...its a KIOTI knob.
-
Mrlunchbox reacted to Old Machinist's post in the thread LX3310 cab model loader knob (grip) removal with Like.
I was hoping someone on here had removed one and KNEW if it screwed on or not. Push comes to shove I can cut it down and thread it or...
-
Mrlunchbox reacted to Russell King's post in the thread LX3310 cab model loader knob (grip) removal with Like.
If it is the hard plastic (hard rubber) type you might try to heat it up and then try to get it off.
-
Mrlunchbox reacted to Dustball's post in the thread LX3310 cab model loader knob (grip) removal with Like.
Try an air nozzle at the stem/knob connection or at the pinhole at the top of the knob to inject some air in there while you're...
-
One more suggestion. When making connections it's good to use some sort of anti-oxidation paste - Penetrox, No-Alox, Ox-Gard etc.
-
Now try it with a test light. Voltmeters are great. But they only measure voltage. A poor connection can have good voltage, but not...