Mr Haney's latest activity
-
Mr Haney replied to the thread Removing Old Grips from ZD326 Control Levers?.I found out why the cutting-height dial would not come off. Someone had been there before me, and I don't mean someone smart. For... -
Mr Haney replied to the thread Removing Old Grips from ZD326 Control Levers?.I don't want to brag, but pulling real hard was one of the first things that occurred to me. I like the razor idea.
-
Mr Haney posted the thread Correct Way to Remove Cutting Height Dial from Zero-Turn in Service, Repair & Maintenance.I have an excellent tip for anyone trying to remove the cutting height dial ("cam dial") from a ZD326 mower in order to get the control...
-
Mr Haney replied to the thread Removing Old Grips from ZD326 Control Levers?.I think I should point out that I was not specific enough. The grips on what Kubota calls "speed levers" or "motion control levers" are...
-
Mr Haney replied to the thread ZD326 Died; Dump Fuel?.I will pick up that additive. I was going to get some Biobor, but the fuel looks good. I guess I can't tell much unless I can see the...
-
A simple way to change the filters is to remove the battery cover, unplug the electric lift pump's wire connector, remove the hose from...
-
Get a bottle of this and treat both tanks and top off the fuel. P.S. get on the ground and visually inspect both fuel filters. I would...
-
Mr Haney replied to the thread Removing Old Grips from ZD326 Control Levers?.I think anything sharp enough to cut off a thick plastic grip is sharp enough to gouge the paint off a lever.
-
Mr Haney replied to the thread Removing Old Grips from ZD326 Control Levers?.I will give that a shot. Thanks.
-
Mr Haney posted the thread Removing Old Grips from ZD326 Control Levers? in Service, Repair & Maintenance.New plastic grips for the controls on my ZD326 arrived. Oh, joy. The old ones are bleached out by the sun, so I want to get rid of...
-
Mr Haney replied to the thread ZD326 Died; Dump Fuel?.I still have to mow the rest of my yard, so I will be trying to do that today. My best guess, based on my failure to comprehend the...
-
Mr Haney replied to the thread Kubota radiators!!!.I find information on parts prices and availability useful.
-
Mr Haney replied to the thread ZD326 Died; Dump Fuel?.I wonder if I can get an endoscope down in there. I just switched to the left tank, fired the machine up, mowed a little, and ran it...
-
Mr Haney replied to the thread ZD326 Died; Dump Fuel?.I don't know if I'm the dumbest person on the forum or what, but I just put a couple of gallons of diesel in each tank, and the mower...
-
Mr Haney replied to the thread ZD326 Died; Dump Fuel?.Thanks for the help. I couldn't get much of anything out of the right tank. I bought a siphon the other day, and the tubing will not...
