Recent content by MOlivin

Now there is... :)

Hi all, Picked up a used 97-2 a couple weeks ago. Just completed a full service on it, when changing out the final drive oil I found that both sides were solid sludge. I was able to full/flush them 4x so they came out nice and clean... on my last runaround the property moving some dirt and rock...

Hi, does anyone have the WSM for Track Loader SLV97-2 ? Can't seem to find a PDF online... just the operators manual. Thanks all!

Getting them on order today. Thanks again for the help!

Just checked it again moving the top of the tire back and forth, yeah theres a lot of play, the right side has zero play. So basically I DO need all those parts listed then?

There is no wobble or noise, it just seems to be the leak. But I only want to do this once... What all parts would be best to get and just replace? All 7 of these? 30 20 50 60 70 80 140 Tractor just hit 1200 hours, I assumed these would have a much much longer lifespan then this. Thanks again!

Cleaned it up this morning, sat for a while and nothing... lifted the right wheel to move the oil to the left side, about an hour later it started flowing. What all parts will I need to replace, just #80.... probably #140 just to be safe? Thanks again all!

will do, thanks guys! Luckily i already have some break cleaner... unluckily it's starting to rain. I'll report back with my findings. I'm guessing they do not make a full wheel bearing assembly like a car? so I don't need to rip it apart and press in each induvial piece

Hi All, Per the photos below, I go to the L6060 the other day and see oil leaking from the front left wheel. Removed the wheel today to see where it was coming from, and it must have been leaking for a bit as theres oil everywhere and I can't see exactly where it's coming out of. Anyone know...

'16 L6060 Hi all, Just picked up a set of Galaxy XD2010, 10ply tires for the fronts. These have a max of 75psi... looking into this it seems almost all 10 and 12ply have high psi ratings. What range should I be running these at to help limit slicing and chunking on the sharp limestone? About...

Anyone have experience with: Hercules Strong Guard S-L2 https://www.herculestirescommercial.com/tire-details/Hercules/Strong-Guard-S-L2 was told this would be a better option then the Titan as it's it's supposedly made with a different rubber or whatever to help against cuts from rock.

Did the foam add a lot of weight to the tire? i've worked with closed cell insulation foam, it's dense and hard but not heavy at all. Thanks, i'll give Crawford a call today to see what they have.

I'm only 20 minutes south of springfield. Where at in Marshfield for tires? I was going to order the Titan fronts online and just have BigO put them on the rims. Also, other then your current set, have you foamed previous tires? I'm reading their a nightmare for the installer when you need to...

How is the tread depth on the rears? Would I be able to get away with just getting a new set for the fronts?

'16 L6060 Purchased the tractor 5 years ago with these tires. And have since tore them up with our Ozark limestone shredding the hell out of them. Below are photos. I'm not sure what the stock tread depth looks like, obviously it looks like the fronts are worn heavily but the backs have plenty...