Recent content by Mikey

After trying all the advise from everyone, I ended up changing the fuel assist pump. Now what happens , is when I start the tractor up, it will die at least twice before it warms up, then I can run at full PTO speed. I have bled the fuel line per my manual instructions, which is... fill fuel...

Cut grass this evening to see what would happen. At 45 minutes it did not even act up, then I could hardly keep it running. Pulled all fuel lines loose into filter. then up to injector pump, with good flow to an exterior pump device. The exit side had nothing, but it is close to being above tank...

Cut grass this evening to see what would happen. At 45 minutes it did not even act up, then I could hardly keep it running. Pulled all fuel lines loose into filter. then up to injector pump, with good flow to an exterior pump device. The exit side had nothing, but it is close to being above tank...

Thank you for your suggestions. I have checked fuel lines up to the injection pump, and have good flow. Cleaned and inspected fuel cap. A suggestion I had from a fellow I work with, was to add an injector cleaner. He said with newer EPA standards a fuel additive is suggested on a regular basis...

I have a B7800 30 horsepower, HSD with under 500 hours that started out with occasional fuel loss to very frequent. I have changed fuel filter with tractor starting after it dies. Anyone have suggestions?