Recent content by miket1

My most heartfelt and sincere condolences, sir!

Yes sir, the 2 hoses on the left that are one in front of the other ( almost look like one ) go to the 3rd function. I couldn't see the stamping last night, but can see the P and T on the bottom sides where the hoses go in. They match the plugged port on the top side ( unused ports ) So, the...

Finally got up to the property and able to actaully look at the tractor. Once again, forgive my ignorance. I have rear remote and 3rd function. As it sits right now, the block under the right side step has the PB hose going to the middle hose in the picture. The right hose goes to the PB on the...

If I had a dollar for every time someone said something couldnt be done, or that I couldnt do it, I would be rich. Now I tell them that just because they dont have the balls, brains or determination to do it, doesnt mean I dont. ( Im weak in the brain these days, but have the balls and...

Dropped those dirtbags 25yrs ago when they turned me down for a $26k land loan after a ridiculous amount of paperwork. Went to a smaller bank and got approved like it was nothing. Closed my WF account and went to the new bank. Years go by and the new bank grew and they are turning into Wells...

Roger that. I have read a bit about that and will be careful using it. This wont be something I use daily, just few things here and there, thats why I couldnt justify the cost of a BH77. I will look at it and see if I can fix the 3pt mechanically. Will take some thinking

I emailed Summit yesterday about this and asked what they recommended, and whether their valve could run the BH continuously without damage if I used the rear remotes to run the BH and just got their response. "I am unsure how you would accomplish this with the current wiring harness that you...

So, in theory, if the lever is never moved after the BH is hooked up, the 3pt should never increase pressures? The BH weighs about 1000lb, which is about 1/3 of the lift capacity of the BH, plus its hanging way off there, so moving the lever could basically drastically increase pressures I would...

My understanding is that if the 3pt lever is all the way down there will be no flow through the 3pt system. I do realize I will have to raise them a small amount to get thing to line up, will fixing the lever in this position prevent flow through the 3pt system, or is that only if its all the...

I do, but since I will need to use the 3pt, what other options do I have? My plan was to get the 3pt where I needed it to be then lock it somehow ( maybe just bungee it down against the adjustable stop ).

Sorry, I misunderstood the part about power beyond. I sincerely appreciate the help! I am sure glad to see it will be fairly easy, thanks again

One connection on the pto pump is open, no hose. I am sure the pump has gotten dirt or water in it and is bad. I wasn't concerned about that since I planned on using the tractor connections

The hoses have been disconnected from the pto pump by the seller, years ago. There is one hose coming off each side of the valve, one with a male quick connect at the end, the other with a female.

The guy I bought it from had it hooked up directly to his old JD tractor. He said he originally used the pto pump, but switched it to tractor hydraulics because the tank was too small in his opinion and it kept sucking air.

I don't see any markings like P or PB. Can't find info in a search for HM:ZT6/60 either.