Recent content by Mikeheinkel

I tried it at the injector to bleed the air out. Then tried it with the bleeder bolt on the pump. Then tried it at the pump line. Got the same results every time. But yeah you’re probably right, going to need a new pump. I can’t think of anything else it would be. Just wish I could test it for...

I tried both ends. Just in case something was clogged

I agree. Probably going to lead to a new injection pump. I did remove the pump and everything looked fine. All the spring pressures felt the same. Nothing looked out of the ordinary.

Yeah I wonder if there’s a way to measure psi out of each port on the injection pump. I would just hate to order a new pump and that not be the problem

Yes OEM. I’ve tried swapping them. No luck. It’s so weird, all 3 lines are getting fuel but when I close that one line it dies and it won’t start either unless I crack it back open

Hi everyone. Ok here goes. I’ve got an 08 kubota rtv900. All cylinders have good compression. Replaced all 3 injectors. It will start and run but only if the number 1 cylinder injector line is cracked open and spewing diesel fuel out. Once I close it, it dies. I think it might be an injection...