Recent content by mikeg85

Do u know if there's a way to rebuild the injection pump or change the o ring or something

I have an old kuvota l210. I just did an oil change and used it yesterday for quite some time it started out with white smoke and spitting oil out the muffler and when I finished I checked the oil and it was real loose and low I'm thinking that somehow diesel is mixing with my oil. Does anyone...

Just got finished taking the valve a lose and cleaning everything out and put it all back together and hooked it up on the tractor with out the loader and everything worked fine. So I hooked the loader up and it's all working now. I don't know if something was stuck r it just lost pressure but...

no nothing changed. I'm going to try changing some of the O-rinags and see if that helps.

I looped them together as you said and that little switch feels like it lose. Like its broken internally or something

Thanks for the help

I don't really know how to post pics. But the lift still raises on if I put the loader up and put it down fast. Please anyone help because doesnt look like I can get a control valve for this tractortractor anymore

Ok so I took everything a lose turned the engine over and there is oil pimping put of every hole so I know it's not the pump. So I put everything back together and started the tractor up and and still nothing from the 3 point. So I set the rpms to about 2100 and lifted the arm up and still...

No Everything was down the loader and the 3 point when I got to the job I was doing it picked right up and I used the loader for a little while and I put it down to grade it off a little bit and it never came back up

I took everything a lose and cranked the engine and everything Is pumping but arms still won't lift

When u say the suction screen is that not the filter also mickeyd. And everything is still hooked up as it was when I unloaded it off the trailer north Idaho wolfman

Yes I even took it out and ran the tractor

I have a kubota l260 loaded tractor up on trailer in the morning 3 point worked fine got to the job I was doing three point worked fine unloading the tractor used loader for a while put 3 point t down and now it doesn't want to go back up if anyone could help it would be greatly apreciated