Recent content by Mike keliher

  1. M

    Stock HD tie down bracket

    Please ignore and remove Sent from my SM-G935V using Tapatalk
  2. M

    Stock HD tie down bracket

    Stock HD tie down bracket. They bolt on up top on the outside of the forks where the two chrome nuts hold everything together. I have a 14 limited, FLHTK. The mounting points or where they are bolton look week to support a 900 lbs bike. I would be using them when transporting place to place as...
  3. M

    Coolant issues

    Thanks to you both, I'll will and give it a try, Sent from my SM-T377V using Tapatalk
  4. M

    Coolant issues

    HELP? No real help from my dealer as of yet. Do we hav a tech line directly to Kubota to discuss issues? Sent from my SM-T377V using Tapatalk
  5. M

    ZD326 question

    Looking down from the seat at the label on the valve door, left is left side tank, middle pointing down is right side, right is the off position on mine. Sent from my SM-T377V using Tapatalk
  6. M

    Coolant issues

    The oil lab analysis came back clean, all is normal. To the dealer i go. Can anyone tell me what I mite expect from them? Does hurt the engine if antifreeze is escaping through the exhaust side of the head? Should I expect Kubota to repair the head or install a new one if needed? I believe a...
  7. M

    Coolant issues

    I've looked at all aspects for leaks. No dust collection or drips. I've drained my oil, amsoil ouch, no sign of smell or discolor. The Small bottle I attached to the coolant overflow has no sign of coolant either. Here in northern Maine temperature never gets hot enough to test the cooling...
  8. M

    Coolant issues

    I've tighten the claps with a cold engine, will try when hot. I added a clamp at the bottom of the overflow tank too. I also check the radiator after looking at the tank level. The radiator is always full to the top. Your question gives me a idea, i will run it and bag the overflow to see if...
  9. M

    Coolant issues

    Thank you, my dealer is small, I'm no sure about their ability. How to approach them is my next step. I need to address this. Should I continue to run or take out of service? Should I test the oil for moisture first? I ran a bx trouble free for years, what a disappointment. Sent from my...
  10. M

    Coolant issues

    I have a 2015, Zd326. 77 hours and it uses about 1 Oz of coolant an hour. I've checked for leaks. No staining or dust collection on on areas near hoses or over flow tank. Radiator holds 11-13 psi. No sign of moisture on oil fill cap or oil dips stick. Radiator cap holds good. Radiator is full...